GMAT™ Exam
Select test center appointment | Scores valid for 5 Years | Multiple Attempts | Round 2 Closing Soon
Karnataka PGCET Exam 2024 - Counselling (Started), Option Entry, Result, Rank Card, Cutoff
Other Top Exam Stories
About Karnataka PGCET 2024
Karnataka PGCET 2024 - KEA announced the Karnataka PGCET 2024 mock allotment on November 11, at cetonline.karnataka.gov.in. Also, the round 1 option entry was concluded on November 11, 2024. Previously, the authority was to release the Karnataka PGCET 2025 mock allotment result for Karnataka PGCET 2024 on November 9. The authority is yet to announce all the revised PGCET 2024 dates online. Eligible candidates had to choose the desired course and college details through the option entry for PGCET 2024 to be eligible for seat allotment. The last date to download the acknowledgement claims slip was November 8, 2024. The Karnataka PGCET 2024 result for M.Tech/M.E/M.Arch/MBA was released on September 28, 2024.
Candidates can check the Karnataka PGCET result on the official website, using their registration number. Qualified candidates can proceed to apply for the Karnataka PGCET counselling through the option entry process. The authority released the final Karnataka PGCET answer key for M.Tech on September 24, 2024. KEA has uploaded the Karnataka PGCET seat matrix and fee structure online. The PGCET 2024 application form correction for M.tech concluded on September 23. Applicants had to complete the graduation marks entry process by September 22 to be assigned a rank in the Karnataka PGCET result. The authority held the Karnataka PGCET 2024 exam for MTech/MArch on September 18.
The authority released the Karnataka PGCET 2024 exam day guidelines and bell timings for the M.E/M.Tech/M.Arch exam online. Moreover, the Karnataka PGCET 2024 admit card was released on September 12. To download the candidates required their application number and the first 4 characters of their name. The authority announced the revised dates for Karnataka PGCET for M.E/M.Tech/M.Arch courses on the official website. Candidates who clear the exam will be eligible for admission to various participating institutes of the state.
Karnataka Examination Authority released the official Karnataka PGCET 2024 answer key for MBA and MCA on August 6, 2024. Candidates can raise objections against the preliminary answer key of Karnataka PGCET 2024 by August 8. The Karnataka PGCET 2024 answer key is available in the format of PDF. KEA has successfully conducted the Karnataka PGCET 2024 on August 4, 2024.
KEA conducts the Karnataka PGCET 2024 exam for MBA, MCA, ME, M.Tech, and M.Arch in CBT mode. The authority has revised the Karnataka PGCET exam syllabus this year. As per the latest syllabus, the Karnataka PGCET exam paper will have five sections and the duration of the exam will be 2 hours. The Karnataka PGCET 2024 question paper has 100 MCQs. Each question carries one mark, and there is no negative marking for an incorrect response.
The Karnataka PGCET exam syllabus comprises five sections:
- Computer Awareness
- Analytical Ability and Logical Reasoning
- Quantitative Analysis
- English language
- General Knowledge
What is Karnataka PGCET exam?
Karnataka PGCET conducts the Post Graduate Common Entrance Test (PGCET) to shortlist candidates for MBA, MCA, ME, M.Tech, and M.Arch as well as lateral entry MCA courses offered by various government/ university/ private aided and private non-aided institutions in Karnataka. GATE-qualified candidates are exempted from appearing for the Karnataka PGCET. They can directly apply for M.Tech admissions offered by the participating institutes based on their GATE scores.
Karnataka PGCET Helpline:
Karnataka Examinations Authority,
Sampige Road, 18th Cross,
Malleshwaram, Bangalore - 560012.
Phone No: 080 - 23460460Exam Data
Karnataka PGCET 2024 official Website: kea.kar.nic.in
E-Mail: keauthority-ka@nic.in
Read more
Latest: Karnataka PGCET Question/Sample Papers
Don't Miss: Top Colleges in India accepting Karnataka PGCET score
Admission Alert : MBA @ Dayananda Sagar University. NAAC A+ Accredited
Karnataka PGCET 2024 Highlights
| Full Exam Name | Karnataka Post Graduate Common Entrance Test |
| Short Exam Name | Karnataka PGCET |
| Conducting Body | Karnataka Examinations Authority |
| Frequency Of Conduct | Once a year |
| Exam Level | State Level Exam |
| Languages | English |
| Mode Of Application | online |
| Application Fee | Offline : 650 +1 more |
| Mode Of Exam | online |
| Mode Of Counselling | online +1 more |
| Participating Colleges | 197 |
| Exam Duration | 2 Hours |
Karnataka PGCET Important Dates
Karnataka PGCET Karnataka Post Graduate Common Entrance Test (session 2024)
27 May' 2024 - 07 Jul' 2024 . Online
Application Date
09 Jul' 2024 - 09 Jul' 2024 . Online
Application Date
Last date for fee payment
04 Aug' 2024 - 04 Aug' 2024 . Online
Exam Date
Read More
The authorities released the PGCET 2024 eligibility criteria through the official brochure. It contains the basic Karnataka PGCET eligibility to be followed by candidates for PG admissions.
Karnataka PGCET: General Eligibility Criteria
- Candidates should have completed a B.Tech course from an institute recognized by the state of Karnataka with a minimum aggregate of 50% in the qualifying degree. However, reserved category candidates are given a relaxation of 5%
- Candidates with valid GATE scores
Karnataka PGCET 2024: Eligibility for Government Seats
Code | Eligibility Criteria |
A | Candidates should have studied and passed in one or more Government/ Government educational institutes located in Karnataka for at least 7 years either periodically or continuously from Class 1 to the qualifying exam |
B | Candidates should have studied and passed the qualifying exam within Karnataka from an institute/ university recognized/ run by the state government |
C | Either parent of candidates must have studied in Government institutions in Karnataka for at least 7 years |
D | Candidate or a parent of the candidate resided in Karnataka for a period of 7 years or more |
The Karnataka PGCET 2024 registration process was closed by KEA on July 7. Candidates can apply for the Karnataka PGCET online at the official website. The Karnataka PGCET 2024 application form is now available on the official website -kea.kar.nic.in.
Given below are the steps for the Karnataka PGCET application form 2024 (reference purposes only):
- Registration: Candidates must visit the official website and click on the Karnataka PGCET registration button. They will have to provide details that involve the name of the candidate, parent’s name, gender, date of birth, email ID, and mobile number. After successful registration, a user ID and password are created, which serves as a unique registration number.
- PGCET 2024 application form: Candidates had to provide all personal and academic details while filling out the Karnataka PGCET application form 2024. Candidates having valid GATE scores will also be required to provide details of the GATE exam.
- Document Upload: While filling out the Karnataka PGCET 2024 application, scanned copies of candidates’ photographs, signatures, and left thumb impressions are to be uploaded by candidates.
- Submission of Application: After cross-verifying all information provided by candidates, they will have to agree to the terms and then submit.
- Application Fee: After submission of the Karnataka PGCET 2024 application declaration, candidates have to pay the required application fee. They can pay the fee online using net banking/ credit card/ debit card or offline through cash payment at any branch of the State Bank of Mysore. After that, candidates should take a printout of the application confirmation page for future reference.
Top colleges accepting Karnataka PGCET score
Candidates can check list of top colleges accepting Karnataka PGCET score here.
Check NowDocuments Required at Exam Karnataka PGCET 2024
Karnataka Post Graduate Common Entrance Test 2024
- Driving
- Admit card
- College id card
- Bus pass
- Driving license
- Passport
- Aadhaar card
- Pan card
- Voter id
Karnataka PGCET 2024 Exam Centers
| State | City |
| Karnataka | Bagalkot Bangalore Belgaum Bellary Bijapur Davanagere Dharwad Gulbarga Mangalore Mysore Shimoga Tumkur |
Civil Engineering
| Type of questions | Objective type questions |
| Total number of questions | 75 |
| Total questions in Part 1 | 50 |
| Marks allotted for each question in Part 1 | 1 mark |
| Number of questions in Part 2 | 25 |
| Marks awarded for right answer in Part 2 | 2 marks |
| Total marks | 100 |
Chemical Engineering
Type of questions | Objective type questions |
| Total number of questions | 75 |
| Total questions in Part 1 | 50 |
Marks allotted for each question in Part 1 | 1 mark |
| Number of questions in Part 2 | 25 |
| Marks awarded for right answer in Part 2 | 2 marks |
Total marks | 100 |
Computer Science and Engineering
| Type of questions | Objective type |
| Total number of questions | 75 |
| Total question in part 1 | 50 |
| Marks allotted for each question in part 1 | 1 mark |
| Number of questions in part 2 | 25 |
| Marks allotted for each question in part 2 | 2 marks |
| Total marks | 100 |
Environmental Engineering
| Type of questions | Objective type questions |
| Total number of questions | 75 |
| Total questions in part 1 | 50 |
| Marrs allotted for each question in part 1 | 1 mark |
| Number of questions in part 2 | 25 |
| Marks awarded for right answer in part 2 | 2 marks |
| Total marks | 100 |
Textile Technology
Type of questions | Objective type |
Total number of questions | 75 |
Total question in part 1 | 50 |
Marks allotted for each question in part 1 | 1 mark |
Number of questions in part 2 | 25 |
Marks allotted for each question in part 2 | 2 marks |
Total marks | 100 |
Electrical Engineering
| Part A | |
| Total number of questions | 45 |
| Number of questions in section 1 | 30 |
| Marks allotted for each question in section 1 | 1 mark |
| Total marks for section 1 | 30 |
| Number of question in section 2 | 15 |
| Marks of each question in section 2 | 2 marks |
| Total marks of section 2 | 30 |
| Total marks of part A | 60 |
| Part B | |
| Total number of questions | 30 |
| Number of questions in section 1 | 20 |
| Marks allotted for each question in section 1 | 1 mark |
| Total marks for section 1 | 20 |
| Number of question in section 2 | 10 |
| Marks of each question in section 2 | 2 marks |
| Total marks of section 2 | 20 |
| Total marks of part B | 40 |
Mechanical Engineering
| Part A | |
| Total number of questions | 45 |
| Number of questions in section 1 | 30 |
| Marks allotted for each question in section 1 | 1 mark |
| Total marks of section 1 | 30 |
| Number of questions in section 2 | 15 |
| Marks of each question in section 2 | 2 marks |
| Total marks of section 2 | 30 |
| Total marks of part A | 60 |
| Part B | |
| Total number of questions | 30 |
| Number of questions in section 1 | 20 |
| Marks allotted for each question in section 1 | 1 mark |
| Total marks of section 1 | 20 |
| Number of questions in section 2 | 10 |
| Marks of each question in section 2 | 2 marks |
| Total marks of section 2 | 20 |
| Total marks of part B | 40 |
M.B.A
Exam pattern of Karnataka PGCET MBA 2023 specifies the topics from questions will be asked, the total number of questions and total time duration of exam. As per Karnataka PGCET MBA exam pattern 2023, the entrance exam will have a total of 100 objective type questions (MCQs) and each question carries one mark. Total time duration of Karnataka PGCET MBA will be two hours (120 minutes). Candidates can check the detailed Karnataka PGCET MBA exam pattern 2023 from the table which is given below.
Exam Pattern of Karnataka PGCET MBA 2023
| Section Name | Questions | Marks | Exam mode |
| Section A- Proficiency in English Language | 25 | 25 | Paper- Pencil mode (OMR Sheet) |
| Section B- Test of General Knowledge | 25 | 25 | |
| Section C- Test of Reasoning and General Intelligence | 25 | 25 | |
| Section D- Quantitative Analysis | 25 | 25 | |
| Total | 100 | 100 |
Other Exams
Pearson Test of English Academic
Register now for PTE & Unlock 20% OFF : Use promo code: 'C360SPL20'. Valid till 30th NOV'24! Trusted by 3,500+ universities globally
Chandigarh University Common Entrance Test
Ranked #1 Among all Private Indian Universities In QS Asia Rankings 2025 | Scholarships worth 210 CR
Graduate Record Exam
Apply for GRE® Test now & save 10% with ApplyShop Gift Card | World's most used Admission Test for Graduate & Professional Schools
Karnataka PGCET 2024 Syllabus
Karnataka PGCET 2024 Civil Engineering 2024
Advance water treatment and waste water treatment methods
Highway geometric design
Traffic engineering
Water supply and sanitary engineering: Unit 31
Advance water treatment and waste water treatment methods
Transportation engineering: Unit 01
Highway geometric design
- Highway cross-section elements, sight distance, design of horizontal alignment, design of vertical alignment
Transportation engineering: Unit 02
Traffic engineering
- Traffic characteristics, traffic operation, pavement materials, design and evaluation, rail gage, train resistance, power of locomotive, rails, sleepers, curvature of track, tunneling of soft soil, transition curve, harbour and dock
Karnataka PGCET 2024 Chemical Engineering 2024
Waste water treatment-preliminary, primary, secondary, and tertiary treatment
Fundamental laws
Mathematical modeling and solutions to the following
Industrial pollution control: Unit 03
Waste water treatment-preliminary, primary, secondary, and tertiary treatment
Process modeling: Unit 04
Fundamental laws
- Review of shell balance approach, continuity equation, energy equation, equation of motion, transport equation of state equilibrium and kinetics, classification of mathematical models
Process modeling: Unit 05
Mathematical modeling and solutions to the following
- Basic tank model-level v/s time
Karnataka PGCET 2024 Computer Science and Engineering 2024
Probability
Set theory and algebra
Combinatorics
Design techniques (greedy, dynamic programming, divide-and-conquer)
Asymptotic analysis (best, worst, average case) of time and space
Upper and lower bounds on the complexity of specific problems
Design and synthesis of combinational and sequential circuits
Number representation and computer arithmetic (fixed and floating point)
Engineering mathematics: Unit 02
Probability
- Conditional probability, mean, median, mode and standard deviation, random variables; distributions; uniform, normal, exponential, Poisson, binomial
Engineering mathematics: Unit 03
Set theory and algebra
- Sets; relations, functions; groups; partial orders; lattice; Boolean algebra
Engineering mathematics: Unit 04
Combinatorics
- Permutations; combinations; counting; summation; generating functions; recurrence relations; asymptotic
Data structures and algorithms: Unit 18
Design techniques (greedy, dynamic programming, divide-and-conquer)
Data structures and algorithms: Unit 19
Asymptotic analysis (best, worst, average case) of time and space
Data structures and algorithms: Unit 20
Upper and lower bounds on the complexity of specific problems
Login design and computer organization: Unit 03
Design and synthesis of combinational and sequential circuits
Login design and computer organization: Unit 04
Number representation and computer arithmetic (fixed and floating point)
Karnataka PGCET 2024 Environmental Engineering 2024
Chemistry
Fluid properties and classifications
Fluid pressure and its measurements
Flow through pipes-Darcy's equation
Flow measurements-orifices, mouthpieces, notches, and weirs
Pumps-types, working and problems
Quantitative and qualitative hydrologic cycle
Precipitation and runoff estimation
Mass diagrams for computing storage capacity
Economic aspects of water resource planning
Physico-chemical and bacteriological characterization of water-surface and sub-surface
Classification of waste water treatment techniques-unit operations and process
Biological units
Guidelines for discharge of industrial effluent on land into municipal sewers and natural water
Sources, composition, and properties of municipal solid wastes
Separation, transformation and recycling-size reduction
Composting-aerobic and anaerobic digestion and energy production
Definition, sources and classification of hazardous waste
Physico-chemical and biological treatment-air stripping
Sources and classification of air pollutants-natural and anthropogenic
Properties of major air pollutants along with sources and sinks-particulate and gases
Measurement of air pollutants-measurement of gaseous and particulate pollutants
Statutory requirements of EIA
Environmental chemistry, biology, and ecology: Unit 01
Chemistry
- Basic concepts of physical chemistry-osmosis, dialysis, adsorption, pollution parameters-pH, COD, BOD, DO, TOC, nitrogen, fluoride, sanitary significance of sulphate, nitrates and phosphates
Environmental fluid mechanics and water resources engineering: Unit 02
Fluid properties and classifications
Environmental fluid mechanics and water resources engineering: Unit 04
Fluid pressure and its measurements
Environmental fluid mechanics and water resources engineering: Unit 09
Flow through pipes-Darcy's equation
Environmental fluid mechanics and water resources engineering: Unit 14
Flow measurements-orifices, mouthpieces, notches, and weirs
Environmental fluid mechanics and water resources engineering: Unit 15
Pumps-types, working and problems
Environmental fluid mechanics and water resources engineering: Unit 16
Quantitative and qualitative hydrologic cycle
Environmental fluid mechanics and water resources engineering: Unit 17
Precipitation and runoff estimation
Environmental fluid mechanics and water resources engineering: Unit 19
Mass diagrams for computing storage capacity
Environmental fluid mechanics and water resources engineering: Unit 28
Economic aspects of water resource planning
Water supply and treatment: Unit 10
Physico-chemical and bacteriological characterization of water-surface and sub-surface
Waste water and treatment: Unit 04
Classification of waste water treatment techniques-unit operations and process
Waste water and treatment: Unit 09
Biological units
- Suspended and fixed growth system, aerobic and anaerobic systems, activated sludge process, trickling filters, RBC, biofilter, secondary sedimentation tank
Waste water and treatment: Unit 17
Guidelines for discharge of industrial effluent on land into municipal sewers and natural water
Solid and hazardous wastes management: Unit 01
Sources, composition, and properties of municipal solid wastes
Solid and hazardous wastes management: Unit 07
Separation, transformation and recycling-size reduction
Solid and hazardous wastes management: Unit 13
Composting-aerobic and anaerobic digestion and energy production
Solid and hazardous wastes management: Unit 17
Definition, sources and classification of hazardous waste
Solid and hazardous wastes management: Unit 28
Physico-chemical and biological treatment-air stripping
Atmospheric pollution and control: Unit 03
Sources and classification of air pollutants-natural and anthropogenic
Atmospheric pollution and control: Unit 05
Properties of major air pollutants along with sources and sinks-particulate and gases
Atmospheric pollution and control: Unit 16
Measurement of air pollutants-measurement of gaseous and particulate pollutants
Environmental impact assessment: Unit 05
Statutory requirements of EIA
- Advantages and limitation of EIA, step-by-step procedure for conducting EIA; objective and scope of EIA; environmental attributes, public participation in EIA
Karnataka PGCET 2024 Textile Technology 2024
Study of different properties of various textiles fibres i.e. moisture relations
Geographic distribution-cultivation and grading of cotton, wool, silk, and jute fibres
Study of semi-continuous and integrated continuous process for production of Nylons
Study of different methods of textursing and various parameters affecting texturising
Blow rooms
Carding
Drawing
Combing
Speed frame
Ring frame
Doubling
Open end spinning
Modern yarn production methods
Winding
Warping
Sizing
Looms
Unconventional weaving machine
Non wovens
Pre-process
Dyeing
Printing
Finishing
Fibres
Yarn
Fabrics
Cocoons
Reeling
Silk throwing
Weaving industry
Spun silk industry
Processing industry
Fabric structure
Terms and definitions used in fashion and garment industries
The art and techniques of body measurements and standard sizes and measurements prevalent in garment industries
Textile fibres: Unit 10
Study of different properties of various textiles fibres i.e. moisture relations
Textile fibres: Unit 16
Geographic distribution-cultivation and grading of cotton, wool, silk, and jute fibres
Textile fibres: Unit 28
Study of semi-continuous and integrated continuous process for production of Nylons
Textile fibres: Unit 32
Study of different methods of textursing and various parameters affecting texturising
Yarn manufacture: Ginning and baling: Unit 01
Blow rooms
- Objects and methods of mixing, opening and cleaning, blow room machineries cleaning efficiency, lap regularity, modern developments, auto mixer and calculations pertaining to blow room
Yarn manufacture: Ginning and baling: Unit 02
Carding
- Objects, working, speeds and setting, grinding and stripping, silver quality, modern developments in carding, calculations related to carding, fibre hooks at card, opening lines required for processing of various blends
Yarn manufacture: Ginning and baling: Unit 03
Drawing
- Objects and principles, roller drafting systems, modern developments, calculations pertaining to draw frame
Yarn manufacture: Ginning and baling: Unit 04
Combing
- Hook formation in carding, study pf preparatory machines to comber, combing process-setting, modern, combers, calculations pertaining to comber
Yarn manufacture: Ginning and baling: Unit 05
Speed frame
- Objects, working and drafting systems, twist insertion, mechanism of winding, lift of bobbin, bobbin building mechanism, speeds and production calculations, modern speed frames
Yarn manufacture: Ginning and baling: Unit 06
Ring frame
- Objects, working and ring frame mechanisms, yarns tension during spinning a yarn and package faults, modern developments, calculations pertaining to ring frame
Yarn manufacture: Ginning and baling: Unit 07
Doubling
- Objects, dry doubling and wet doubling, fancy yarns, hosiery and seing threads, properties and end uses
Yarn manufacture: Ginning and baling: Unit 08
Open end spinning
- Principles of break spinning, comparison of ring and OE yarns, recent developments in OE spinning, different types of rotors and opening rollers
Yarn manufacture: Ginning and baling: Unit 09
Modern yarn production methods
- Twist less spinning, self twist spinning, wrap spinning, friction spinning and air-jet spinning, comparison of the above methods for their principles and yarn properties, end used and techno-economics feasibility
- Siro, core and cover spinning methods
Fabric manufacture: Unit 01
Winding
- Objects, derivation of speeds, coil angles, cone angle, study of modern winders production calculations
Fabric manufacture: Unit 02
Warping
- Objects, study of modern warping machines, production calculations
Fabric manufacture: Unit 03
Sizing
- Study of ingredients, properties, modern size cooking equipments, modern sizing machine, production calculations
Fabric manufacture: Unit 04
Looms
- Study of plain tappet tappet loom, automatic looms, drop box looms, dobby and jacquard looms, production calculations
Fabric manufacture: Unit 05
Unconventional weaving machine
- Study of gripper, rapier, air jet, water jet machines
Fabric manufacture: Unit 06
Non wovens
- Classification, web productions techniques, properties of binders, geometry of non woven structures identification and testing of non wovens, study of thermal, spun bonding and spun lacing
- Knitting: Well basic stitches, jersey, rid, purl, interlock, warp basic stitches, pillar, atlas, tricot, study of circular well knitting machines, advantages of positive feed, study of warp knitting machines-Tricot and Raschel
Chemical processing of textiles: Unit 01
Pre-process
- Preparatory processes to wet processing; an overview of wet processing, sequences of wet processing, desizing-methods of desizing, singeing-methods of singeing, batching, souring, bleaching, mercerizing
- Methods of purifying fibre yarn and fabric made from other natural fibre like silk, wool, jute etc; methods of desizing-scouring and bleaching of regenerated cellulose fibre
Chemical processing of textiles: Unit 02
Dyeing
- Coloration, theories of coloration/ dyeing, factors that affect dyeing mechanism of dyeing, mechanism used for dyeing, classification of dyes, dyeing of natural fibres using direct, reactive, acid, metal complex, yat, sulphur
- Ingrain dyes and other popular dyes using different methods, after treatments and testing o dyed materials, yarn package dyeing, dyeing of knitted fabrics, dyeing of garments
Chemical processing of textiles: Unit 03
Printing
- Design development for printing, sources of inspection, the designers tools and work space, different techniques for design generation and reproduction, transfer of designs on wooden blocks, screen and stencil, scope of printing
- Methods and principles of printing, machineries used for textile printing, passage of material through printing machines
Chemical processing of textiles: Unit 04
Finishing
- Objects of finishing, various methods of finishing, cotton, silk, wool, worsted fabric, chemicals formulation of different finishes, machiners used for finishing, speciality chemicals used for finishing, finishing, of garments
Textile testing: Unit 01
Fibres
- Regain, length, fineness, maturity, strength, their determination, HVI and AFIS
Textile testing: Unit 02
Yarn
- Yarn count, twist, strength, hairiness, uniformity and their determination
Textile testing: Unit 03
Fabrics
- Fabric weight, thickness, cover, tear, abrasion, drape, crease, colour fastness, their determination
- Fabric handle-KESF and FAST
Silk technology: Unit 01
Cocoons
- Sorting of cocoons, cocoon testing, storage of cocoons, stifling of cocoons, drying of cocoons, cooking of cocoons
- Methods employed-characteristics of cocoons
Silk technology: Unit 02
Reeling
- Methods of silk reeling-charakha, cottage basins, filatures, semi automatic an automatic types
- Raw silk testing-packing of raw silk, utilization of by-products
Silk technology: Unit 03
Silk throwing
- Manufacture of yarns for use in ordinary, chiffon, crepe, georgette fabrics, number of plies and different twist levels used
- Developments in silk throwing industry
Silk technology: Unit 04
Weaving industry
- Warp and weft preparation, machineries employed in small scale and organized sections
- Silk weaving, handloom and power bow weaving, special features of silk looms, modifications required on power loom to weave silk fabrics
Silk technology: Unit 05
Spun silk industry
- Raw materials for spun silk yarn production, production of spun yarn and their properties
Silk technology: Unit 06
Processing industry
- Degumming and drying of silk yarns, dyeing, printing and finishing of silk fabrics
Silk technology: Unit 07
Fabric structure
- Study of plain, twill, stain, crepe, Mockleno and towelling structures
- Backed cloths, extra wrap and extra well cloths, double cloth terry weaves, velvet, velveteens, gauge and leno, Damask Brocade cloths
Fashion design and garment technology: Unit 01
Terms and definitions used in fashion and garment industries
Fashion design and garment technology: Unit 02
The art and techniques of body measurements and standard sizes and measurements prevalent in garment industries
Karnataka PGCET 2024 Electrical Engineering 2024
Linear algebra
Calculus
Vector calculus
Differential equations
Partial differential equations
Probability and Statistics
Numerical methods
Network topology
Circuit concepts
Two-port network
Electric filed
Analog electronics
FET-RC coupled amplifier
Digital electronics
Stability
Nyquist stability criterion
State space techniques
8051 microcontroller
8051 programming
Rotating machines
Transformers
Power generation, transmission, and distribution
Power electronics
Power system analysis and computer methods in power systems
VLSI design and embedded systems
Signals and systems, and DSP
Analog and digital communication, and networking
Micro waves and antennas
Power electronics
8086 microprocessor
Functional elements of instrument and measurement system
Electronic instrumentation and measurements
Process instrumentation
Process control
Analytical, optical, and biomedical instrumentation
Signals and systems, DSP
Human anatomy and physiology
Biomedical instrumentation
Medical imaging systems
Signals and systems and DSP
Biomedical signal processing
Medical image processing
Engineering mathematics: Unit 01
Linear algebra
- Matrices and determinants, rank of matrix, systems of linear equations, Eigen values and Eigen vectors
Engineering mathematics: Unit 02
Calculus
- Limit, continuity, and differentiability. Partial derivatives, test for convergence, Fourier series
Engineering mathematics: Unit 03
Vector calculus
- Gradient, divergence and curl. Line, surface, and volume integrals; Stokes theorem, problems related to Gauss and green's theorems
Engineering mathematics: Unit 04
Differential equations
- Linear and non-linear first order ODEs, higher order linear ODEs with constant coefficients, Cauchy's and Euler's equations
Engineering mathematics: Unit 05
Partial differential equations
- PDEs, formation of PDEs, solution of PDE by direct integration and separation of variables. Heat and wave equations
Engineering mathematics: Unit 07
Probability and Statistics
- Mean, median, mode, and standard deviation; random variables; Poisson normal and binomial distributions; correlation and regression analysis
Engineering mathematics: Unit 08
Numerical methods
- Solutions of linear and non-linear algebraic equations; integration of trapezoidal and Simpson's rule; numerical solutions of ordinary differential equations
Electric circuits and fields: Unit 01
Network topology
- Graph of network, concept of tree, links, tie set schedule, cutset schedule
Electric circuits and fields: Unit 02
Circuit concepts
- Source transformation, circuit analysis using loop current and node voltage methods, star-delta conversion, dual networks and concept of controlled sources
- Network theorems-Thevenin's, Norton, maximum power transfer, superposition and reciprocity, resonant circuits, transient analysis, Laplace transformations and applications, standard test signals, initial conditions
Electric circuits and fields: Unit 03
Two-port network
- y and z parameters and h-parameters of two port networks
Electric circuits and fields: Unit 05
Electric filed
- Coulomb's law and electric field intensity, electric flux density
Analog and digital electronics: Unit 01
Analog electronics
- Diode circuits, rectifiers, transistor biasing and bias stability, class A, class B, and class C amplifiers, small signal h-parameter equivalent circuit of transistor
- Expression for current gain, voltage gain, input impedance, RC coupled amplifier, frequency response, half power frequencies, bandwidth and factors influencing the bandwidth
- RC Coupled emitter follower amplifier, current gain, voltage gain, input and output impedance, applications
Analog and digital electronics: Unit 02
FET-RC coupled amplifier
- Power amplifiers: Class A, class B, push pull, and class C power amplifiers, maximum power output, driving power requirements
- Feedback amplifiers and oscillators: Concept of positive and negative feedback, advantages of negative feedback. Voltage and current feedback, effect of the same on performance characteristics. Condition for oscillation, Wein bridge oscillator
- Feedback amplifiers and oscillators: Expression for frequency of oscillation, crystal oscillators. Voltage regulator, operational amplifiers, comparator, ZCD, precision rectifier, I to V and V to I converters, instrumentation amplifiers, square wave
- Feedback amplifiers and oscillators: Triangular wave and saw tooth wave generator
- Wave shaping circuits: Clipping, clamping, integrator and differentiator circuits
Analog and digital electronics: Unit 03
Digital electronics
- Number Systems and codes: Decimal, binary, octal, hexadecimal, binary coded decimal, octal, hex numbers, excess 3 and gray codes, binary arithmetic
- Digital circuits: Combinational logic circuits-digital signals, Boolean constants and variables, basic logic operations, AND, OR, NOR gates and realization or truth tables, Boolean-expressions, simplification of Boolean expressions using basic theorems
- Digital circuits: Combinational logic circuits-Karnaugh map method of obtaining logic expressions, maxterm, mintenn realization of logic functions using basic gates and also using NAND and NOR gates. Half adder, full adder, multiplexers, demultiplexers
- Digital circuits: Combinational logic circuits-encoders and decoders, A/D and D/A converters
- Sequential logic: SR latch, clocked RS FF, D FF, JK and T FF, master slave JK-FF, edge triggered flip-flops, registers, shift registers, asynchronous counters, synchronous counters
- Semiconductor memories: RAM, ROM, PROM, EPROM, EEPROM, and Flash
Control systems: Unit 09
Stability
- Absolute and relative stability, RH criterion. Polar plots, phase cross over and gain cross over frequencies
- Bode plots, phase plot, and gain plot, determination of gain and phase margins
Control systems: Unit 10
Nyquist stability criterion
- Principle of mapping of Nyquist path, gain margin, phase margin
- Nyquist stability criterion
- Root locus
Control systems: Unit 11
State space techniques
- State variables, state model of linear systems, solution of state equation, state transition matrix
8051 microcontroller: Unit 03
8051 microcontroller
- Architecture, memory organization, addressing modes, instruction set
8051 microcontroller: Unit 04
8051 programming
- Assembly language programs, time delay calculations and subroutines
Electrical and electronics: Unit 01
Rotating machines
- Principles of operation, EMF equation of DC machine, constructional features, classification, generator action, voltage regulation
- Motor action, characteristics, applications, efficiency, testing of DC machines, starting of DC motors
- Principle of operation and constructional features of induction motor, equivalent circuit, circle diagram of IM, torque equation, starting of IM and speed control
- Construction and operation of cylindrical rotor and salient pole synchronous generator, EMF equation, harmonics and their minimization, armature reaction, regulation by EMF method, MMF method and ZPF methods
- Two reaction theory for salient pole machine
- Determination of Xd and Xq from slip test, synchronization, synchronizing with infinite bus, parallel operation of two alternators, operation on infinite bus, load sharing, effect of change in excitation power angle
- Equation of power in terms of power angle
- Synchronous motor: Principle of operation, V and inverted V curves, synchronous motor as synchronous condenser for pf improvement, method of starting, torque and torque angle
Electrical and electronics: Unit 02
Transformers
- Single phase and 3-phase transformer, principle of operation, equivalent circuit, vector diagram, efficiency and regulation
- Polarity test, OC and SC tests, pre determination of efficiency and regulation
- Power and distribution transformer
- All day efficiency, Sumpner's test, 3-phase transformer connection, 3-phase to 6-phase, Scott connection and open delta, harmonics
- Auto transformers: Construction, application, 3-phase autotransformers.
Electrical and electronics: Unit 03
Power generation, transmission, and distribution
- Hydel, thermal, and nuclear power plants, plant factors, technologies connected with the above plants, power plant economics, major equipment in power stations, power factor improvement, substation
- MVA calculation, current limiting reactors, typical transmission and distribution schemes, overhead transmission lines
- Line parameters, calculation of resistance, inductance and capacitance
- Short medium and long transmission lines
- HVAC/DC generation and measurement
- Insulators: Types potential distribution in suspension insulators string efficiency, testing of insulators; underground cables types, material used, grading of cables, charging current, testing of cables
- AC distribution system: Radial and ring main system
- Switch gear and protection: Fuses, circuit breakers, switches, relays, protector schemes. HVAC/DC generation and measurement
Electrical and electronics: Unit 04
Power electronics
- Power semiconductor devices, power diodes, power transistors, power MOSFET, IGBT, their switching characteristics ,merits and demerits, their typical application
- Thyristor two transistor analogy, static and dynamic characteristics-turn on and turn off characteristics, gate characteristics, triggering schemes, snubber circuits, over current and over voltage protection
Electrical and electronics: Unit 05
Power system analysis and computer methods in power systems
- Representation of power systems components: Single line diagram, per unit concept
- Symmetrical 3 phase faults: Short circuit current and selection of circuit breaker
- Symmetrical components: Resolution of unbalanced voltage and current into their symmetrical components
- Power in terms of symmetrical components, positive, negative and zero sequence networks of power systems
- Power system stability; steady state and transient stability
- Swing equation, equal area criteria and its application
- Load flow studies, solution of load flow studies by Gauss Sidal, N.R method and fast decoupled method, economic operation of power system
Electronics and communication engineering/ telecommunication engineering: Unit 01
VLSI design and embedded systems
- Micro-electronics, CMOS logic structures, scaling, sub-system design and layout, testability, embedded system design and development, RTOS
Electronics and communication engineering/ telecommunication engineering: Unit 02
Signals and systems, and DSP
- Types of signals and systems, properties of systems, convolution, correlation, Fourier series and transforms (discrete time), Z-transform, DFT and FFT, structure for FIR and LK system, windowing techniques, analog and digital filter design
- FIR and IIR filter design
Electronics and communication engineering/ telecommunication engineering: Unit 03
Analog and digital communication, and networking
- AM, FM, PM, digital communication sampling, digital coding of analog wave forms, ISI, digital modulation techniques-PSK, BPSK, QPSK, MSK, spread spectrum, ISO/ OSI model, TCP/IP model, internet working
- Wireless communication-cellular concept, cell fundamentals, capacity expansion techniques, mobility management, GSM channel concept, CDMA channel concept, diversity techniques, wireless LAN
Electronics and communication engineering/ telecommunication engineering: Unit 04
Micro waves and antennas
- Transmission lines, characteristic impedance, impedance transformation, passive and active microwave devices, microwave measurement, radar systems, radio telemetry
- Rectangular wave guides and circular wave, guides, antenna parameters-radiation pattern, beam area, radiation intensity, beam efficiency, directivity angain, effective height, radiation efficiency, reciprocity theorem, dipole antennas, antenna arrays
- Different types of antennas
Electronics and communication engineering/ telecommunication engineering: Unit 05
Power electronics
- Diodes, transistors, amplifiers, voltage regulators and power supplies, characteristics of DIAC, TRIAC, MOSFET, IGBT, thyristors and its control circuits, control rectifiers, commutation techniques, AC voltage controller
Electronics and communication engineering/ telecommunication engineering: Unit 06
8086 microprocessor
- Architecture, memory segmentation, addressing modes, instruction set, I/O interfacing, 8255, 8253
Instrumentation technology: Unit 01
Functional elements of instrument and measurement system
- Instruments and measurement systems, different types of instruments, functions of instruments and measurement systems, applications of measurement systems, elements of generalized measurement system
- Input-output configuration of measuring instruments and measurement systems, methods of correction for interfering and modifying inputs
- Transducers, classifications of transducers
Instrumentation technology: Unit 02
Electronic instrumentation and measurements
- Static and dynamic characteristics of measurement systems, standards and calibration, gross errors and systematic errors, absolute and relative errors, basic concepts of accuracy, precision, resolution and significant figures
- Measurement error combinations and error analysis
Instrumentation technology: Unit 03
Process instrumentation
- Transducers and sensors for the measurement of displacement, level, stress and stress, force and torque, pressure, temperature, flow, vibration, density, viscosity, turbidity, humidity and moisture, sound, speed and thickness
Instrumentation technology: Unit 04
Process control
- Introduction to process control, final control
- Controller principles-all types of discontinuous and continuous controllers, analog and digital controllers
- Control loop characteristics, multivariable control, feed forward control, cascade control, modeling and simulation from plant automation, industrial control applications, programmable logic controllers (PLC)-introduction, design and programming
Instrumentation technology: Unit 05
Analytical, optical, and biomedical instrumentation
- Analytical Instrumentation: Introduction, principles of UV, visible and IR spectroscopy. Flame emission spectroscopy and atomic absorption spectroscopy, chromatography
- Optical instrumentation: Fundamentals of lasers, solid and semiconductor lasers and their characteristics. Applications of lasers-interferometers and holography. Basics of fiber optics
- Biomedical instrumentation: Biomedical transducers and electrodes. Instrumentation and recording of ECG, EEG, respiratory rate, blood pressure and blood flow. Cardiac pacemakers and defibrillators
Instrumentation technology: Unit 06
Signals and systems, DSP
- Types of signal and systems, properties of systems, convolution correlation, Fourier series and transforms (discrete time) Z-transform, DFT and FFT, windowing techniques, analog and digital filter design, IIR, FIR filter design
Biomedical engineering and medical electronics: Unit 01
Human anatomy and physiology
- Homeostasis, types of tissues, cardiovascular system, nervous system, respiratory system, skeletal and muscular system, digestive system
Biomedical engineering and medical electronics: Unit 02
Biomedical instrumentation
- Biomedical transducers and electrodes, sources of bioelectric potentials. Bioelectric signals-ECG, EEG, EMG
- Defibrillators, cardiac pacemakers, implantable pacemakers, respiratory measurement, blood pressure and blood flow meters, audiometers
Biomedical engineering and medical electronics: Unit 03
Medical imaging systems
- X-ray and radiography, computed tomography, ultrasound imaging, radionuclide imaging, magnetic resonance imaging
Biomedical engineering and medical electronics: Unit 04
Signals and systems and DSP
- Types of Signals and systems, properties of systems, convolution, correlation, discrete time Fourier series and discrete time Fourier transforms. Z-transform, DFT and FFT, windowing techniques, analog and digital filter design, ER, FIR filter design
Biomedical engineering and medical electronics: Unit 05
Biomedical signal processing
- Digital filters, ER filters-smoothing, notch, derivatives, sampling, integer filters, data reduction techniques, signal averaging
- ECG signal processing, QRS detection-power spectrum of ECG, BP filtering techniques, different template matching techniques. EEG signal processing and analysis
Biomedical engineering and medical electronics: Unit 06
Medical image processing
- Image sampling and quantization, enhancement in spatial domain, properties of 2D Fourier transform, enhancement in frequency domain, basic compression methods, image compression standards, edge detection, edge linking and boundary detection, thresholding
- Region based segmentation, colour image processing
Karnataka PGCET 2024 Mechanical Engineering 2024
Differential equations
Partial differential equations
Metal joining processes
Materials management
Work study and ergonomics
Quality management
Industrial management
MIS
DBMS
OR
CAD/ CAM
Metrology
Introduction
Automotive electrical and electronics
Vehicle dynamics
Automotive component design
Metrology and measurements
CAD/ CAM
Metrology
Operations research
Quality management
CAD/ CAM system
Metal forming
Non destructive testing
Metal cutting
OR
Theory of metal cutting
Plasticity and metal forming
Welding technology
Industrial robotics
Automation in manufacturing
CAD/ CAM
Metrology and measurements
Heat transfer
Industrial management
Mechatronics
POM
OR
CAD/ CAM
Metrology and measurements
Engineering mathematics: Unit 08
Differential equations
- Linear ordinary differential equations, first order non linear ordinary differential equations, initial and boundary value problems, Laplace transformation
Engineering mathematics: Unit 09
Partial differential equations
- Numerical methods: System of linear equations. Jacobi, Gauss Seidel and Crout's methods, Runge Kutta and Newton-Raphson methods, probability and statistics, Gaussian and Weibul distribution and properties, method of least square
- Numerical methods: Regression analysis, and analysis of variance, Fourier transforms
Production engineering: Unit 06
Metal joining processes
- Soldering, brazing and welding, modem welding processes; metal cutting tools-machine tool operations, non-traditional machining processes
Industrial engineering and management: Unit 07
Materials management
- Introduction, purchasing, stores: Inventory-supply chain management
Industrial engineering and management: Unit 12
Work study and ergonomics
- Productivity, work study, method study, ergonomics
Industrial engineering and management: Unit 13
Quality management
- Statistical process control, control charts, inspection and test-sampling plans
Industrial engineering and management: Unit 14
Industrial management
- Introduction, management function, motivation and behaviour
Industrial engineering and management: Unit 15
MIS
- Fundamentals, business application, issues in management information technology
Industrial engineering and management: Unit 16
DBMS
- Introduction, concepts and architecture and data modeling
Industrial engineering and management: Unit 17
OR
- LPP, transportation, assignment problems, inventory control, PERT-CPM
Industrial engineering and management: Unit 18
CAD/ CAM
- Product cycle, elements of CAD/ CAM system-hardware and software, modeling. Transformations, NC, CNC, robots configurations and applications, programming language, robotic sensors
Industrial engineering and management: Unit 19
Metrology
- Limits, fits, tolerances, gauges, comparators, surface finish measurements
Automobile engineering: Unit 01
Introduction
- 2 Stroke and 4 Stroke engines, engine components, carbonation, petrol and diesel fuel injection, combustion in S.I. and C.I. engines, engine cooling
Automobile engineering: Unit 02
Automotive electrical and electronics
- Storage batteries, ignition system, starter motor, charging system
Automobile engineering: Unit 03
Vehicle dynamics
- Undamped and damped vibrations, forced vibrations, vehicle vibrations on human comfort
Automobile engineering: Unit 04
Automotive component design
- Power for propulsion, design of I.C. engine parts and gear box
Automobile engineering: Unit 05
Metrology and measurements
- Limits, fits, and tolerances, types of gauges, comparators, surface finish equipment's, pressure, and flow and strain measurement
Automobile engineering: Unit 06
CAD/ CAM
- Product cycle, elements of CAD/ CAM system-hardware and software, modeling, transformations, NC, CNC, robots configurations and applications, programming language, robotic sensors
Industrial and production engineering: Unit 01
Metrology
- Limits, fits, and tolerances. Gauges, comparators, surface finish
Industrial and production engineering: Unit 02
Operations research
- LPP, transportation, assignment, game theory
Industrial and production engineering: Unit 03
Quality management
- Statistical process control, control charts, inspection and test, sampling plans
Industrial and production engineering: Unit 05
CAD/ CAM system
- Hardware and software, modeling, transformations, NC, CNC, robot configurations and applications
Industrial and production engineering: Unit 06
Metal forming
- Rolling, forging, extrusion, sheet metal forming
Industrial and production engineering: Unit 08
Non destructive testing
- Liquid penetrant, ultrasonic, radiography, magnetic particle inspection and leak test
Industrial and production engineering: Unit 10
Metal cutting
- Basic theory-tool life, tool wear, cutting tools, geometry and materials
Manufacturing engineering: Unit 01
OR
- LPP, transportation, assignment problems, inventory control, PERT-CPM
Manufacturing engineering: Unit 02
Theory of metal cutting
- Cutting tools, geometry, materials, measurement of cutting forces, tool wear and life
Manufacturing engineering: Unit 03
Plasticity and metal forming
- Yield criteria, 2-ID plastic flow, fundamentals of metal working, drawing, extrusion, forging and rolling
Manufacturing engineering: Unit 04
Welding technology
- Introduction, metal joining process, welding processes: Pressure, gas and electric, testing and inspection
Manufacturing engineering: Unit 05
Industrial robotics
- Robot components, classification, configuration, direct and inverse kinematics, robot programming and sensors
Manufacturing engineering: Unit 06
Automation in manufacturing
- Automation; definitions, reasons, high volume production systems, computerized manufacturing systems and networks
Manufacturing engineering: Unit 07
CAD/ CAM
- Product cycle, elements of CAD/ CAM system-hardware and software, modeling, transformations, NC, CNC machines
Manufacturing engineering: Unit 08
Metrology and measurements
- Limits, fits, and tolerances, types of gauges, comparators, surface finish equipment's, pressure, and flow and strain measurement
Mechanical engineering: Unit 01
Heat transfer
- Modes of heat transfer, one dimensional heat conduction
- Fins dimensionless parameters in convective heat transfer
- Forced convection heat transfer over flat plates and through tubes
- Free convection heat transfer over flat plates and cylinders, radiation, heat transfer, heat exchangers, LMTD and NTU methods
Mechanical engineering: Unit 02
Industrial management
- Introduction, management function, motivation, and behaviour fluid machines: Introduction, principles of hydraulic machines, impulse and reaction turbines, steam turbines
Mechanical engineering: Unit 03
Mechatronics
- Introduction, transducers, mechatronic elements, pneumatic, hydraulic, electrical and mechanical actuation systems, signal conditioning
Mechanical engineering: Unit 04
POM
- Plant layout, plant location, forecasting, scheduling , inventory control
Mechanical engineering: Unit 05
OR
- LPP, transportation, assignment problems, inventory control, PERT-CPM
Mechanical engineering: Unit 06
CAD/ CAM
- Product cycle, elements of CAD/ CAM system-hardware and software, modeling, transformations, NC, CNC, robots configurations and applications, programming language, robotic sensors
Mechanical engineering: Unit 07
Metrology and measurements
- Limits, fits, and tolerances, types of gauges, comparators, surface finish equipment's, pressure, and flow and strain measurement
Karnataka PGCET 2024 M.B.A 2024
Karnataka PGCET 2024 M.C.A. 2024
Algebra
Coordinate geometry
Boolean algebra
Trigonometry
Probability and Statistics
Computer basics
Data representation
Binary arithmetic
Operating systems
Mathematics: Unit 01
Algebra
- Fundamental operations in algebra, expansion, factorization, simultaneous linear/ quadratic equations, indices, logarithms, arithmetic, geometric and harmonic progressions, binomial theorem, permutations and combinations, determinants, matrices
- Sets and application to solution of simultaneous linear equations
Mathematics: Unit 02
Coordinate geometry
- Rectangular Cartesian coordinates, equations of line, mid-point, intersections etc, equations of a circle, distance formulae, pair of straight lines, parabola, ellipse and hyperbola, simple geometric transformations such as translation, rotation, scaling
Mathematics: Unit 03
Boolean algebra
- Basic operations, evaluation of Boolean expressions, basic postulates of Boolean algebra
Mathematics: Unit 04
Trigonometry
- Simple identities, trigonometric equations, properties of triangles, inverse function
Mathematics: Unit 05
Probability and Statistics
- Basic concept of probability theory, averages, dependent and independent events, frequency distributions and measures of dispersions, Skewness and Kurtosis, correlation and regression, random variables
Computer awareness: Unit 01
Computer basics
- Organization of a computer, central processing unit (CPU), input/ output devices, computer memory, programming languages, types of software's, general awareness about internet, web applications, database applications and information systems
Computer awareness: Unit 02
Data representation
- Representation of characters, integers and fractions, binary, ASCII and hexadecimal representations
Computer awareness: Unit 03
Binary arithmetic
- Addition, subtraction, multiplication, division, two's complement arithmetic, floating-point representation of numbers, normalized floating-point representation
Computer awareness: Unit 04
Operating systems
- Evolution of operating systems, types of operating systems, functions of an operating system, modern operating systems
KEA issued the Karnataka PGCET 2024 hall ticket for M.E/M.Tech/M.Arch courses on September 12, 2024. The authority released the Karnataka PGCET admit card in online mode. Candidates can download their PGCET admit card 2024 using their application number and the first four characters of their names. The Karnataka PGCET 2024 admit card contains the basic information of the candidates, including their name, roll number, father’s name, venue, date and time of examination, photograph, and signature of the candidate. Candidates are advised to check the Karnataka PGCET admit card for any discrepancies soon after downloading. Candidates must contact the authorities in case of any discrepancies in the hall ticket. The admit card for Karnataka PGCET 2024 (MBA and MCA) was issued on July 25.
Steps to Karnataka PGCET Admit Card download
- Visit the Karnataka PGCET 2024 official website
- Click on the link to PGCET admit card 2024
- Enter application number and the first four characters of your name.
- Click on ‘Submit’
- The admit card will appear on the screen
- Check the admit card for the discrepancy
- After ensuring, download and print copy of admit card
KEA released the final answer key for Karnataka PGCET 2024 on September 24. The provisional Karnataka PGCET 2024 answer key for MTech was released on September 19. The authority also released the final answer key for MBA and MCA courses on its official website. The answer key contains answers to all the questions asked in the Karnataka PGCET exam 2024. With the help of the Karnataka PGCET answer key, candidates can verify their answers and thus calculate their probable scores.
The PGCET 2024 answer key is released in two stages – provisional answer key and final answer key. Candidates are also allowed to raise objections against the provisional Karnataka PGCET 2024 answer key by logging in using the required credentials. The Karnataka PGCET answer key objection window will be closed on August 8.
The Karnataka Examinations Authority declared the Karnataka PGCET 2024 result on September 28, 2024. The authority has updated the Karnataka PGCET result link on the official website cetonline.karnataka.gov.in. Candidates can check their ranks through the Karnataka PGCET result 2024. The authority prepares a merit list based on the candidate's performance in the Karnataka PGCET and or GATE exam.
How to check Karnataka PGCET 2024 result?
- Visit the KEA official website, cetonline.karnataka.gov.in.
- Scroll down to the latest announcements section and click on the Karnataka PGCET result link
- Login using the PGCET 2024 application number
- Result and merit list will be displayed on the screens
The Karnataka Examinations Authority (KEA) uploaded the Karnataka PGCET mock allotment 2024 on November 11. The authority concluded the extended option entry process for the Karnataka PGCET 2024 counselling round 1 on November 11 (10:00 AM). The Karnataka PGCET counselling dates 2024 for round 1 have been revised. The registration process for Karnataka PGCET counselling is conducted in online mode only. Candidates are called to participate in Karnataka PGCET counselling based on their ranks. Counselling will be held in several rounds, and candidates are allotted seats accordingly. The authority will release the seat allotment result for Karnataka PGCET counselling 2024 in online mode.
PGCET 2024 Counselling Process
- Registration: In order to participate in Karnataka PGCET 2024 counselling, candidates have to register online.
- Document verification: The authorities will conduct verification of documents for registered candidates at the help centres. Candidates will have to carry all the relevant documents to prove their eligibility.
- Allotment of the secret key: Once candidate documents are verified, a verification slip and secret key are provided during Karnataka PGCET 2024 counselling. To enter their preference of courses and colleges, candidates have to log in with the secret key.
- Choice filling: Candidates will have to fill out their choice of courses and colleges during Karnataka PGCET counselling 2024. The same has to be entered in the order of preference.
- Mock Allotment: For choices filled by candidates, mock allotment will be done by KEA, reflecting the results based on candidate preferences and their performance in Karnataka PGCET and GATE.
- Seat Allotment: Karnataka PGCET 2024 seat allotment results will be announced online for each round of counselling. Candidates have to log in with the required credentials. Seats will be allotted based on candidate rank in the Karnataka PGCET and preferences filled by them during choice filling.
- Reporting to the allotted institutes: Allotted candidates have to report to the allotted institute to complete the admission process. Candidates are required to pay the admission fees at the allotted institute to confirm their seat.
Documents Required at Karnataka PGCET 2024 counselling
Karnataka Post Graduate Common Entrance Test 2024
- Print out of filled Karnataka PGCET 2023 application form
- Candidates's copy of fee challan
- Admit card
- Class 10 marksheet
- Class 12 marksheet
- Marksheet of qualifying degree for all years/semeters
- Degree certificate/ provisional degree certificate
- Study certificate signed by BEO (for Karnataka candidates)
- GATE score card (if applicable)
- Caste certificate/caste income certificate/Income certificate obtained from the concerned tahasildar for Karnataka candidates only (if applicable)
- Parent’s domicile certificate/ study certificate / hometown certificate / employment certificate / cumulative record / marks sheet, etc. for candidates claiming eligibility for Government seats based on domicile/ study/ employment of parent (if applicable
- Certificate issued by the concerned assistant commissioner for candidates claiming Hyderabad-Karnataka region reservation (if applicable)
- Sponsorship certificate (if applicable)
General Information
Contacts
08023460460
Frequently Asked Questions
1. Is the Karnataka PGCET 2024 counselling schedule released?
Yes, the authority has released the Karnataka PGCCET counselling schedule 2024 on the official website.
2. Is the Karnataka PGCET answer key 2024 pdf for MTech released?
The authority uploaded the final Karnataka PGCET answer key 2024 pdf on September 24. It consists of the answer keys for two subject papers which have been updated after due consideration.
3. When will the Karnataka PGCET 2024 admit card be released?
The Karnataka PGCET 2024 exam hall ticket for M.E/M.Tech/M.Arch was issued on September 12, 2024. The authority issued the Karnataka PGCET admit card for MBA and MCA on July 25, 2024.
4. When will the Karnataka PGCET 2024 exam to be held?
The Karnataka PGCET 2024 exam for M.E/M.Tech/M.Arch courses was conducted on September 18, 2024. The authority held the Karnataka PGECT exam for MBA and MCA courses on August 4, 2024.
5. When will PGCET result 2024 be declared?
The Karnataka PGCET result 2024 was declared on September 28, 2024.
6. When will the Karnataka PGCET 2024 registration process concluded?
The last date to submit the Karnataka PGCET 2024 application form was July 7.
7. When will the Karnataka PGCET 2024 application form starts?
The application form of PGCET Karnataka 2024 was released on May 27.
8. What is the applicable exam pattern for Karnataka PGCET?
The authorities conduct Karnataka PGCET 2024 in CBT mode for a 2-hour duration. It will be 100 questions, with 1 mark. There is no provision for negative marking.
9. Can a candidate of outside Karnataka State fill the Karnataka PGCET application form 2024?
Yes, as per the Karnataka PGCET 2024 eligibility criteria, candidates of any state can fill the application form.
10. What is Karnataka PGCET exam 2024?
The Karnataka Examinations Authority (KEA) conducts Karnataka Post Graduate Common Entrance Test (PGCET 2024) for admissions in postgraduate programmes across Karnataka State.
E-books and Sample Papers
Questions related to Karnataka PGCET
Have a question related to Karnataka PGCET ?
The Karnataka Post Graduate Common Entrance Test (PGCET) 2024 was conducted for the purpose of determining the eligibility/merit, for admission of Karnataka and non-Karnataka candidates to 1st year / 1st semester full time / part time MBA.there are more than 250 plus college under this entrance test according to your rank you may get these colleges
1.New Horizon College Of Engineering (E&T) (MBA) BANGALORE
2.Dr Ambedkar Institute Of Technology (MBA) BANGALORE
3.Canara Bank School Of Management Studies,(UNI.)(MBA) BANGALORE UNIV., BANGALORE
4.BNM Institute Of Technology (MBA) BANGALORE
sadafreen356 01 October 2024
If you have entered "result awaiting" for your degree marks card in the Karnataka PGCET application and cannot edit the application now, it could be an issue. Typically, the application form requires accurate academic details, including marks obtained in previous semesters.
However, the Karnataka Examination Authority (KEA) does provide a correction window for the application form. If the correction window is still open, you may be able to update your details. If it has closed, you should contact the KEA directly for guidance on how to proceed, as they may have specific protocols for such situations.
It’s essential to ensure that all information is correct to avoid any complications during the admission process.
sai raja 16 September 2024
Finding specific past papers for exams like the Karnataka PGCET (Post Graduate Common Entrance Test) can be a bit challenging, especially for older years. Here are some steps you can take to find the 2010 MBA paper or similar resources:
1. University Websites: Check the official website of the Karnataka Examinations Authority (KEA) or the university conducting the PGCET. They sometimes have archives or links to past papers.
2. Educational Forums and Websites: Look at educational forums, websites, or online communities where students discuss past papers and exam resources.
3. Library Resources: Visit the library of a local college or university. They might have archives of previous years' exam papers.
4. Contact the Exam Authority: Reach out directly to KEA or the institution that conducted the PGCET in 2010 to inquire if they can provide or direct you to the past papers.
5. Study Groups: Join study groups or online forums where candidates preparing for similar exams might share resources and past papers.
If you need help with specific topics or other resources for preparing for the MBA entrance exam, let me know!
https://engineering.careers360.com/articles/karnataka-pgcet-sample-papers
Asmee Biswas 17 September 2024
Applying for PGCET with missing study certificates can be challenging but not impossible.
- Required Certificates: While specific requirements vary, generally, most study certificates (especially recent ones) are crucial.
- Missing Certificates: For missing certificates, you might need to obtain duplicate copies from respective schools. There might be specific procedures and fees involved.
- Non-Karnataka Board: Certificates from boards other than Karnataka might require specific conversions or equivalency certificates. Check PGCET guidelines for details.
Crucially, contact the PGCET helpline or visit the official website for precise information. They can guide you on specific requirements, alternatives, and potential solutions for your situation.
It's advisable to start the process early to avoid last-minute hurdles.
monag2673 16 July 2024
Previous Year Karnataka PGCET MBA Cut Off
Name of the College Karnataka PGCET Cut Off Rank (MBA)
KLE Society's Inst. of Management Studies and Research 2,890 3,923
Cambridge Inst. of Technology, Bangalore 6,544 8,923
JSS Academy of Technical Education, Bangalore 3,253 4,334
Government RC College of Commerce, Bangalore 5,516 4,550 1
As per the past year trends for GM category, candidates seeking admission to PES University must score between 213 and 255. In 2020, PES University Karnataka PGCET cutoff was 213, in 2021 it was 228 and in 2022 it was 255. On analysing the trends for MBA cutoffs have been increasing.
G PAVAN KUMAR 14 September 2024
M.Tech/M.Arch Admissions OPEN
IIM Indore MMS Program
ApplyApply for IIM Indore Master of Management Studies program
Amity University Online Programs
ApplyApply for Online MBA from Amity University
Chitkara University Online MBA
ApplyApply for Online MBA from Chitkara University
Symbiosis Online Programs
ApplyOnline PG programs from Symbiosis Centre for Distance Learning
GMAT™ Exam
ApplySelect test center appointment | Scores valid for 5 Years | Multiple Attempts | Round 2 Closing Soon
DPU Online MBA
ApplyApply for Online MBA from Dr. D.Y. Patil Vidyapeeth
News and Notification
Courses Offered
forComputer Science Engineering
College Available: 4
Civil Engineering
College Available: 2
Environmental Engineering
College Available: 2
Electrical and Electronics Engineering
College Available: 1
Mechanical Engineering
College Available: 1
Back to top