I am interested in automation and arduino based projects but dont like coding stuff. Which field should I choose IT / EC / ICT
Hello aspirant,
To use an Arduino board you do require a certain level of programming skills. If you want to work on projects that will automate using an Arduino board you have to learn the Arduino programming language. It is a pretty easy one and something similar to the C language.
You need to write down the code using Arduino IDE and upload it on the board to run the set of instructions to accomplish a task. Here, you can opt for EC because you'll learn about electronics and a bit of communication. Also, there is not much programming involved in this course.
Programming language for Arduino you can learn using online resources like Arduino. cc, javatpoint, tutorialspoint , and so on.
I hope this information helps!
Thank you!
Answer laterI got 116 in aeee can I get scholarship for automation and robotics at amrita university coimbatore
With a score of 116/180 marks in AEEE 2021, you can expect your rank around 14000.
Scholarships in Amrita campuses are based upon merit. Scholarship is given to toppers in AEEE.
The scholarship amount in Amrita university is 25% , 50% and 90% of tuition fees.
To get a scholarship you should have a rank below 1000. In order to get this rank your score should be more than 160 marks.
So it is difficult for you to get a scholarship based upon your AEEE marks. You can still try for other scholarships provided under various categories.
Hope this helps
Good Luck!!
Which branch is best Electrical / Mechanical / ICT / EC My interest is robotics and automation. At present I do Arduino Projects. So for me which branch would you prefer to go as a core branch for B.Tech
Dear Aspirant,
All these branches are interdisciplinary and interdependent for robotics and automation field.Knowledge of all these branches is used and required in automation and robotics.Also there are institutes/colleges which offer special B.Tech programme in Robotics and automation
You can use careers360 Career guidance tool-
https://learn.careers360.com/mcmf/
Find more about Robotics & Automation Here:
https://www.careers360.com/courses/automation-and-robotics-course
college of engineering pune,,pg automation course entrance test syllabus 2021
Hello aspirant !
College of Engineering,Pune is located in Pune, Maharashtra. Founded in 1854, it is accredited by AICTE, NBA and affiliated with Savitribai Phule Pune University (SPPU).COEP provides 45 courses around 2 streams, including Engineering, IT and over 4 degrees, such as B.Tech, B.Plan, M.Tech, M.Plan. Hostel, library, laboratories are available to its students. Admission in M.Tech and M.Plan id done through GATE and CEED respectively.
To get an admission for PG in COEP,Students should pursue a Bachelor of Technology degree from any university. They need a minimum of 50 per cent of the marks.The candidate should submit an online application form for the GATE exam.He/She should meet the cutoff criteria for GATE and then appear for the GATE examination.The selection will be based on the GATE score.So,the candidate has to participate in the GATE counselling process.
Hope this helps you !! All the best !!
Feel free to ask if you have any more queries.
Hi there I want to persue Robotics field bcoz I like robotics stuff, also I am interested in PCBs, Arduino based projects and automation projects, but idk which field id better for me. Someone says go with core branch (Mechanical or Electrical), some says ICT or EC Can you please guide abt field
Hi Aspirant,
You can directly go for Robotics and Automation Engineering rather than pursuing any other streams of Engineering. As you have mentioned about your interests , those all are included in Robotics and Automation Engineering as the course subjects includes: Computational Geometry ,Computer-aided Manufacturing, Automation, Biocybernetics, Digital Electronics And Microprocessors, Design And Control, Robot Manipulators, Artificial Intelligence, Signal Processing, Robot Motion Planning, Computer Integrated Manufacturing System, etc.
Refer the link below to access some more information regarding Robotics and Automation courses,
https://www.careers360.com/courses/automation-and-robotics-course
Hope this is resourceful.
All the Best!!!
can a PCMB student with IT as an additional subject aplly for undergraduate AI or automation and robotics engineering?
Hey,
To be very honest the eligibility for an engineering degree for any course requires that a candidate needs to have passed 10+2 from a recognised board with Physics and Mathematics as their main subjects.
As you have PCMB and also IT you are perfect for the course you have mentioned. As you have IT it will be easier for you to understand the language and hence will help you to learn the language easily.
You can apply to different college offering the course either through merit based or entrance test selection as decided by the respective college.
Hope that helps.
All the best.
Thank you.
should I take btech in robotics what they teach us in this course or should I take robotics and automation engineering?
As per your questions
B.Tech Robotics Engineering syllabus include electrical measurement, thermodynamics, mechanics of solids, machine design, , signal processing, and much more.
In eight semesters that curriculum that provide core, basic sciences, practical and industrial-based training.
Robotics is a multidisciplinary branch.
Automation and Robotics of engineering takes a majorly relies on the principle of artificial intelligence and encompasses they provide designing the prototype to building the final resourceful output. The students who are fascinated by the idea of robotic mechanics are most suitable for this course.
For more information you can visit here
Automation and Robotics
Degrees offered:B.E /B.Tech, B.Voc., Diploma, Dual Degree, M.E /M.Tech., P.G.D, Ph.D
B.E /B.Tech in Automation and Robotics Colleges in India 2021
https://engineering.careers360.com/colleges/list-of-be-btech-in-automation-and-robotics-colleges-in-india
Thank you . All the best.
I hope this answer helps you.
How is the campous placement for VIT chennai mechatronics and automation? and ratio for the placement?
Hi Aspirant!
I am afraid to say that VIT Vellore is no good for mechatronics or automation branch. No doubt VIT is popular for its placement records but those are only good for CSE, IT , EEE or ECE. All the other branches than these has less number of placement opportunities. The average salary offered by the recruiting companies for the branches like automation or mechtronics is no more than 3-4 LPA. I would suggest you to chose any other branch if you apply.
Thankyou!
Is mechatronics with automation is nice course to study in vit chennai as sticked to it?
Mechatronics with automation is a good course but it may not give you better knowledge in Vit Chennai. I think it better to go for mechanical or some other stream as the Mechatronics syllabus is almost too Mechanical but not as much as Mechanical in detail.
post diploma in industrial automation and robotics
Hi Aspirant,
It is a good course and also has many recent scopes with present advent of technologies.Robotics & industrial automation refers to the use of control systems, computers and information technology in handling various processes and machinery in an industry.You can get placements in various rising companies and small robotics companies.
Hope it helps!!
