Bvoc in construction technology
Hi,
B.voc in construction technology is a three-year-long course. B.voc provides a decent job job in construction /real estate/ infrastructure development sector/ architecture agencies / constructing firms.
These are the colleges -
1. IPU
2. Singhania University.
3.IIU
4. GBPIT
5. Amity University
6. Shivaji University
7. ABIT
8. Rajasthan University.
for mtech in construction technology and management , reva university and ms Ramaiah applied sciences which is better to choose
.
In case you are looking only for educational quality then both the college's are well enough good for the educational quality they provide for students.
.
Now, if you want good facilities, campus, environment then MS ramaiah is well enough good for its, facilities, campus, etc,
.
- MS ramaiah has 60 acres of campus where Reva has 45 acres.
- Total faculties in MSR are 580 where in Reva faculty strength is 380
- Facilities like bank, WiFi, parking, , convenience store are not available in Reva college.
Here are the things you can find in both of them.
Now,its upon you to choose.
Best of luck
Which collage is there for tis course in AP for ceramic engineer
Hey !
The college offering b.tech in ceramic engineering in andhra pradesh is :
Andhra University College of Engineering- Autonomous (AUCE (A)), Vishakapatnam
Well , there are six colleges offering construction management in andhra pradesh , which are :
- KLU , Guntur
- Andhra University College of Engineering- Autonomous (AUCE (A)), Vishakapatnam
- SHRI SHIRDI SAI INSTITUTE OF SCIENCE AND ENGINEERING ( SSSISE) , ANANTAPUR
- GLOBAL LIFE INSTITUTE OF FIRE & SAFETY ENGINEERING ( GLIFSE) , HYDERABAD
- LUMBINI GROUP OF INSTITUTIONS ( LGI) , BHONGIR
- VATHSALYA GROUP OF INSTITUTIONS , BHONGIR
Hope it helps!
which is better course among civil engineering and construction technology and management
Hello candidate. Both civil engineering and construction technology amd management are better in their own way.Construction management is the overall planning,coordinationcand control of a project from beginning to completion. Civil engineering is also similar to construction management.It depends on your interest to choose which one is best.
Can I provide design plans to clients only with my BE degree in civil?
Yes u can.Something to consider at the basic level of residential construction and alteration as an example of the difference:In most municipalities, ALL construction and structural changes must be stamped by a PE, NOT an Architect unless they are licensed as a Professional Engineer, which it is then assumed they have the Engineering abilities to perform the required analysis.
An Engineer with a Structural focus, especially if their experience is in construction or either public/commercial or residential projects is at an advantage as far as crossing over into the Architect’s domain over the Inverse.
An Architect in most cases, would need to go back to school and undertake to work under a Professional Engineer to get even the basic tools of structural design, strength of materials & etc. as part of their competency set.No one would trust most Architects to remotely know how to build what they design.But, Art can be picked up by most engineers, in fact depending upon their schooling, they may already have an eye for design from the art classes required for renderings related to their studies in draftsmanship.
The rest is simply study of architectural forms and history - which, I’m sorry Architects out there, is not some secret sauce only available to students in Architecture departments or Fine Arts for that matter.As far as some comments here on “material qualities” for design. That my good people is very similar to how an Engineer categorizes materials properties.
They actually already do that except from a structural and integrity stand point. Not difficult at all or a far stretch to add the dimensions required for Architectural design.It can be a stretch for an Architect to move into applied engineering if they have no previous background. It will take more work than the Inverse.
I got 1474 rank in VITMEE and have opted for M.Tech in Construction Technology and Management (30 seats only), will I get the seat in Cat1 ?
Hello aspirant! Let me tell you that with a rank of 1478 in VITMEE examinations 2019, you are not going to get a seat in construction technology and management under Category 1. You might have a chance to get a seat with this rank. You can check the cut off for different colleges from the link below :
https://www.google.com/url?sa=t&source=web&rct=j&url=https://engineering.careers360.com/articles/vitmee/amp&ved=2ahUKEwizzd3av_XiAhWJeisKHZVQC1MQFjACegQIBxAC&usg=AOvVaw27UpLt-rPdQ8sJ7-RFy2rm&cf=1
Hey can I get a seat for construction technology and management in Dayananda sagar college of engineering with 19,000 rank in comedk ??
Congratulations! You have secured
a very good rank in COMEDK. By considering the previous year rank list for
Dayananda Sagar College of Engineering, 51075 is the closing rank for admission
in any course in Dayananda Sagar College of Engineering, Bangalore. So your
rank is very much enough for seeking admission in Construction Technology
and Management in Dayananda Sagar College of Engineering, Bangalore.
All the best!
Can I get a seat in Dayananda sagar college of engineering with 19,000 rank in comedk for civil or construction technology and management ??
Hello student,
Congratulations! You have secured a very good rank in COMEDK. By considering the previous year rank list for Dayananda Sagar College of Engineering, 51075 is the closing rank for admission in any course in Dayananda Sagar College of Engineering, Bangalore. So your rank is very much enough for seeking admission in Civil or Construction Technology and Management in Dayananda Sagar College of Engineering, Bangalore.
All the Best!
What is the FEES pattern followed per year in construction technology in Bhausaheb Vartak Polytechnic , Vasai West ?
Hii Harsh
The fee pattern of Bhausaheb vartak polytechnic college is regulated by Fee Regulatory Authority (FRA), Maharashtra. The fee structure of 2017-18 admission is as follows:
1. 1st and 2nd semester Rs.65000+Rs.920 Exam and enrolment fee
2. 2nd and 3rd semester Rs.65000+ Rs.720
3. 5th and 6th semester Rs.70800+ Rs.820 Exam and enrolment fee
4. Third fourth semester directly admitted Rs.65000+ Rs.1020 Exam, enrollment and eligibility.
Which IITs and NITs offer m.tech in construction planning and management with descent placements?
There are many IITs and NITs that offer Mtech in construction planning and management.
1) IIT Bombay offers this course with good placement. more than 80%of students get the placements. The average package of last year was 16LPA and more than 75 international offers last year.
2) National institute of technology, Tiruchirapalli.
3) IIT Madras
4)IIT Delhi
5)NIT Surathkal
All the IITs and NITs have good placements