is it better to do metallurgy in NITs OR mechanical engineering 4yrs in iiit kancheepuram becaz I got iiit kanch. mech round2? plz answer
Hello Aspiarant
First of all let me advice you that before choosing a branch figure out your interest first,if you like mechanical go for it.Okay, now coming to the question you asked IIIT Kancheepuram mechanical is good but don't expect really good placement at IIIT Kancheepuram placement for ME is bleak and only few core companies like Saint Gobain and Triad visit.The average placement is around 3.5-4 LPA but as teaching standard is good so, if you want to go for higher studies then this is a good choice.
Now coming to Metallurgy if you are getting Metallurgy in top tier NITs then go for it NIT Trichy is really good considering teaching quality and even placement is decent companies like JSW,Tata Steel,Schlumberger are major recruiters, at a delicious average of around 6 LPA.But if you are going to lower NITs you might find it a bit difficult.
I would strongly recommend to try our College comparison algorithm,it will help you get detailed information
https://www.careers360.com/compare-colleges
Hope this will help you
Regards
I got iiitdm kancheepuram mechanical engineering 4yrs should I go for metallurgy or chemical engineering in NITs by floating or not? which is better in placement and career scope!
I will advice you to go for IIITDM Kancheepuram Mechanical Engineering, unless you are getting Metallurgical or Chemical in one of the best 10-12 NITs namely NIT T, W, K, C, RKL, MNNIT, MNIT, MANIT, VNIT, NIT JSR, SVNIT Surat or perhaps NIT Raipur. However let me tell you Metallurgical and Chemical Engineering both are the most student friendly branches and have a structred curriculum as well as excellent Placements in both Core and Non Core sectors in the above NITs.
Otherwise, IIITDM Kancheepuram Dual Degree Mechanical Course is too a good choice, with excellent infrastructure, faculty and core placements. Located nearby Institutes like IIT Madras and NIT Trichy as well as Industrial hubs at Chennai and Madurai further provided impetus to training, projects, research and placements. In core sectors Ashok Leyland, TVS, Wabco, Tractor India Limited, GE , Saint Gobain, L&T, TCS have been some of the major recruiters. Many students of IIITDM after pursuing the dual degree progran move to universities abroad or higher technical institutes like IITs and IISc for pursuing Doctoral degree.
For more information and college prediction do follow the link below
https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer
I got iiitdm kancheepuram mechanical engineering 4yrs btech is it good to join there and placements?
Greetings, Jagan.
IIITDM Kancheepuram is definitely a good college (many rating websites have rated it generously). The college has a 52 acre campus appreciated by all the current students which is always a plus in my books!
Now, regarding your query - from the data and reviews I could find and read online (I did a lot of searching and reading), it appears that internship and placement opportunities for Mechanical Branch at IIITDMK are average as in the avg. package offered in 2019 (to Mech graduates) was around 4-8 Lacs per annum and the placement rate for the Mech branch also seems to be on the lower side (with around 32 Mech students placed in 2019)
so the pros include - great campus, good faculty, good hostel
and the cons include - average placements and internships, distance from city (about 50Kms)
If you are aiming for further studies after Engineering then I'd personally advice to go for it but if your circumstances demand you to be placed right after college into a good job then I don't think it is worth the risk (assuming the placement rates remain same 4 years from now)
If you have other alternatives then do compare them in terms of placements but if you are sure that you can somehow find better opportunities on your own (out of campus placements, finding good internships on your own, etc.) then you may very well survive with a good job at the end.
It is up to you so take your time but don't miss the deadlines! best of luck for your Engineering experiences ahead.
iiitdm kancheepuram Vs iiit Basar which is better regarding placements and reputation all?? in mechanical engineering
Hello. As per my research, IIIT Kancheepuram is best quoted in relation to placement and reputation.
It has recorded the highest package till now and that is 20LPA. Whereas, IIIT Basar has recorded 17LPA.
For mechanical engineering also, best faculty and practical knowledge can be earned at IIIT Kancheepuram. Its internship opportunities are great and will always thrive you thoroughly to seek knowledge.
Hope that helps!
NIT ANDHRAPRADESH Cse and IIIT KANCHEEPURAM CSE WHICH IS BEST
Hello Maddula
IIIT Kancheepuram is the better one in all aspects as compared to NIT AP because IIIT's curriculum is quite better and faculties are experienced of both ,IIIT's rating is a lot better for everything from infrastructure to placement and all because it has a better campus and infrastructure compared to NIT the fees for both are quite the same 5.30 lakhs for 4 years and the average salary for both is 5-7 lakhs per annum and NIT's highest salary is 13 lakhs per annum whereas IIIT's highest salary is 20 lakhs per annum so after looking at everything i will suggest you to choose IIIT Kancheepuram i will also attach a link where you can compare and check it yourself
https://www.careers360.com/compare-colleges
hope this helps you
NIT ANDHRA PRADESH CSE OR IIIT KANCHEEPURAM CSE WHICH IS BEST
Hello Teja ,
Almost both are good colleges small differences According to web data and results NIT Andhra pradesh is quite better compared to IIIT Kancheepuram . Let see some differences between colleges .
- Both are Public / Government Universities .
- Both college offer B,tech and M.tech Courses but in IIIT Kancheepuram offers dual degree .
- Average Package offered is 6 LPA for B.tech students in NIT andhra pradesh whereas coming to IIIT Kancheepuram 4.5 Lakhs for B.tech students .
If you want some more information about colleges then go through these links you get some idea .
NIT Andhra pradesh
https://www.careers360.com/university/national-institute-of-technology-andhra-pradesh
IIIT Kancheepuram
I think this answer will help you lot .
All the best !!!!
Are fee waiver schemes there in IIIT Kancheepuram for bpl students?
Hello There,
In IIIT Kancheepuram there are lot of scholarships for eligible students, as follows-
- Merit-cum-Means Scholarships of Rs.1000/-p.m. are sanctioned to 25% of eligible B. Tech. Students whose parental income is less than Rs.4.5 lakhs. Further they are also exempted from Payment of tuition fees.
- Institute free Studentships (IFS) scholarships are sanctioned to 10% of eligible B.Tech. students whose parental income is less than Rs.4.5 lakhs. They are exempted from payment of tuition fees.
There is also Reserve Scholarships for SC/ST students:
- SC/ST students, admitted to B. Tech. programmes, whose parental income is less than Rs.4.5 lakhs are eligible for concession in messing charges and exempted from payment of hostel seat rent. They are granted the pocket allowance of Rs.250/-p.m. Further they are also exempted from payment of tuition fees.
- Top class education scholarship for SC students : Complete fee waiver : Rs. 45000/- for purchasing Desktop, Printer, UPS, Multimedia System. : Rs. 2220/- p.m. as Lodging – boarding charges : Rs. 3000/- p.a. for purchasing stationary items
- Top class education scholarship for ST students : Complete fee waiver : Rs. 45000/- for purchasing Desktop, Printer, UPS, Multimedia System. : Rs. 2220/- p.m. as Lodging – boarding charges : Rs. 3000/- p.a. for purchasing stationary items
- 1500 scholarships are annually distributed/awarded by National Handicapped Finance and Development Corporation.
Hope this Helps :)
which is better, ece at iiit kancheepuram or production/ metallurgical at nits?plz tell me.
If you are getting Ece, then you should definitely go for it. IIIT Kanchipuram was established in 2007 and it has very well established facilities. It's faculties are very good and most of them are IIT graduates. They are very knowledgeable.
Also, IIIT Kanchipuram
Production engineering and mettalurgy engineering are also good at the NITs. But they don't have as much scope as ECE.
Depending on your interest, you can go for whichever you want but ECE would be much better choice than mettalurgy and production engineering.
Please visit this link for more details about ECE at IIIT Kanchipuram BTech ECE
Hope it helps
I want to join in iiit kancheepuram what would be my total fee for 4 years as I belong to obc ncl and my annual income is less than 1lakh
Hello Student,
IIIT Kanchipuram is one of the top ranked universities in the country. And since it is a government funded institution the fees is relatively on the lower side when compared to the other private institutions. And if you apply for ews category or some special provisions you might be able to get fee waivers as well depending on the specific criteria fulfillment. But this is not sure since there is no guarantee about this. You can check about further details in our website link given below: