• NIT Manipur
• NIT Patna
• NIT Durgapur
• MNIT Bhopal
• NIT Calicut

Hello,

Without clearing JEE ADV it is not possible to get a seat on the IITs. But with your rank you can get a decent NIT with good branch. The name of the colleges those who are accept your rank are mentioned as follows:-

1. NIT DELHI
2. NIT JAMSEDHPUR
3. NIT GOA
4. NIT PATNA
5. NIT AGARTALA
6. NIT RAIPUR
7. NIT KARNATAKA
8. NIT DURGAPUR
9. NIT MIJORAM
10. NIT BHOPAL
11. NIT HAMIRPUR
12. DR. B R AMBEDKAR INSTITUTE OF TECHNOLOGY

Apart from all these if you want to enhance your chances then go for the college predictor link given below:-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

Hope for the best.

Thank you.

Hello Aspirant,

As we go through the latest cut-off of 2020 then it shows that the closing SC rank was 9986 for Smart Manufacturing branch in IIIT Kancheepuram for SC category.

And this year we saw a little dip in the cut-offs so it is possible that this time we can see some increased closing ranks but at this time it is not possible to say it exactly because it depends upon many factors and those factor keeps changing therefore the cut-off varies.

You can check out the latest cut-offs from the link given below :-

https://josaa.nic.in/Result/Result/currentorcr.aspx

You can check out marks Vs ranks Vs Percentile from the link given below :-

https://engineering.careers360.com/articles/jee-main-marks-vs-percentile

Or

You can also use JEE-Main Rank Predictor to predict your rank :-

https://engineering.careers360.com/jee-main-rank-predictor

Note that the above prediction is made on the basis of latest cut-offs available on official website of JOSAA or CSAB and the cut-offs are bound to change every year depending upon various factors such as the number of candidates appearing in an examination, the number of candidates qualifying an examination, difficulty level of the paper, and so on.

To have a list of all those colleges which you can get based upon your score, category, and state you can use JEE-Main College Predictor :-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

As you are preparing for JEE-Main then I would recommend you to check the resources made by our experts to help aspirants like you in the best and smart preparation of JEE-Main :-

https://learn.careers360.com/jee-main-coaching/?utm_source=%20QnA

I hope this information helps you.

Good Luck!!

Hello aspirant

Hope you are doing great there . First of all congratulations for this rank . See , the closing ranks in the counselling of CSAB depends totally on the basis of availability of vacant seats . But if you try till the last round of counselling , you might be able to fetch a seat there .

You can also refer to the link given below

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

I hope my answer helps

Wish you all the very best

Hello Aspirant,

See on the basis of your percentile it is bit difficult to guide you with an accurate prediction so we need your CRL rank to make accurate prediction, you can mention it in the comment section. However if we go through the latest data then your CRL rank must be somewhere around 70000-80000 (just an assumption to give you an idea of seat allotment).

As we go through the latest cut-offs of JEE-Main 2020 of JOSAA 6th round then it shows that :-

Closing CRL rank for IIIT Kancheepuram was :-

• Smart Manufacturing branch - 43973

So you have almost no chances to get IIIT Kancheepuram with any of the branches.

You can check out the latest cut-offs from the link given below :-

https://josaa.nic.in/Result/Result/currentorcr.aspx

Note that the above prediction is made on the basis of latest cut-offs available on official website of JOSAA or CSAB and the cut-offs are bound to change every year depending upon various factors such as the number of candidates appearing in an examination, the number of candidates qualifying an examination, difficulty level of the paper, and so on.

To have a list of all those colleges which you can get based upon your marks, category, and state you can use JEE-Main College Predictor:-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

If you are preparing for JEE-Main 2022 then I would recommend you to check the resources made by our experts to help aspirants like you in the best and smart preparation of JEE-Main 2022 :-

https://learn.careers360.com/jee-main-coaching/?utm_source=%20QnA

You can also check out the JEE-Main 2021 cut-offs and know whether you have qualified for JEE-Advance 2021 or not, so it is given below :-

==>> Common Rank List (CRL) - 87.8992241-100.0000000 Percentile

==>> GEN-EWS - 66.2214845-87.8950071 Percentile

==>> Other Backward Classes (OBC-NCL) - 68.0234447-87.8950071 Percentile

==>> Scheduled Caste (SC) - 46.8825338-87.8950071 Percentile

==>> Scheduled Tribe (ST) - 34.6728999 87.8474721 Percentile

==>> PwD - 0.0096375-87.8273359 Percentile

So as per the above table you are qualified for JEE-Advance 2021 so you should start preparing for it.

You can check more details about JEE-Main 2021 cut-offs from the link given below :-

https://engineering.careers360.com/articles/jee-main-cutoff

I hope this information helps you.

Good Luck for your future!!

Hi

Making  prediction is difficult as  cutoff  depends upon various factors like :-

-----------) number of students/ candidates  that appeared in the  jee main exam,

-----------) number of available seats,

-----------) performance of different students in the examination,

-----------) the branch you want,

-----------) the category you belong etc.

-----------) your rank in jee main

But yes,

When we go through previous year trend then

>>>>>>>>>  With  7000 sc rank

Yes, you can get IIIt Kancheepuram but on lower branches

You have chances in following  which are listed below along with their closing rank in 6th round of josaa counselling 2020 under other state/ all india quota   :-

------------) Indian Institute of Information Technology, Design & Manufacturing, Kancheepuram :- Smart Manufacturing (4 Years, Bachelor of Technology):- 9986 sc rank

------------)IIIT Rajasthan:- cse :- 7250 sc rank

------------)IIIT Kalyani, West Bengal :- CSE :- 8988 SC rank

------------)Indian Institute of Information Technology(IIIT) Dharwad:-cse:- 9297 sc rank

------------)Indian Institute of Information Technology(IIIT) Kottayam:- computer science:-9971 sc rank

And more

You can check the closing ranks  at official website of josaa by going through the link given below

https://josaa.nic.in/Result/Result/currentorcr.aspx

Or

For previous year cut offs of top colleges like NITs, IIITs , you can also refer our page at :-

NITs :- https://engineering.careers360.com/articles/nits-cutoff-for-top-btech-branches

IIITs:- https://engineering.careers360.com/articles/jee-main-cutoff-for-top-iiits

Above prediction has been made  considering  past year cut off data but  closing rank for colleges varies every year depending upon many factors like jee main question paper difficulty, number of students writing the exam etc so

To have a personalised report on your chances of getting a college you can go through our college predictor, it will give you complete list of colleges which you can get on the basis of the category you belong to,  your home state, your gender etc, the link for  jee main college predictor is provided below

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

To help you  further,

Minimum percentile in jee main 2021 to qualify it to  be eligible for jee advanced 2021 is given below :-

--------) general :-87.8992241 percentile

--------) EWS:- 66.2214845 percentile

--------) OBC-NCL :- 68.0234447 percentile

--------) SC :- 46.8825338 percentile

--------) ST:- 34.6728999 percentile

--------) PWD :- 0.0096375 percentile

Thank you

Hi,

Now a days , the jobs and placement scanerio for CSE is very good. Because of this most of the students want to get into CSE. For Mechanical, the placement is not that good when you compare with CSE. IIIT Kancheepuram is among the newer IIITs. The Placement of CSE is good with Median Salary of around 9 lakhs. But for Mechanical it is not that good when compared with CSE. Mechanical Students do get placed but with lower CTC. So, if you are feeling CSE in any other IIITs, then you should go for that ,else you can take Mechanical.

In order to predict which other colleges you could get ,you can use this tool : https://engineering.careers360.com/jee-main-college-predictor?utm_source=qna&utm_medium=jee_cp

Thanks!!!

Hello Aspirant,

As we go through the latest cut-off of 2020 then it shows that the closing CRL rank was 43973 for Mechanical Engineering branch in Indian Institute of Information Technology, Design & Manufacturing, Kancheepuram under All India quota for Open/General category.

Now to secure such rank you should have your JEE-Main  score at least 120+ marks out of 300 and percentile against this should be around 97+.

You can check out the latest cut-offs from the link given below :-

https://josaa.nic.in/Result/Result/currentorcr.aspx

You can check out marks Vs ranks Vs Percentile from the link given below :-

https://engineering.careers360.com/articles/jee-main-marks-vs-percentile

Or

You can also use JEE-Main Rank Predictor to predict your rank :-

https://engineering.careers360.com/jee-main-rank-predictor

Note that the above prediction is made on the basis of latest cut-offs available on official website of JOSAA or CSAB and the cut-offs are bound to change every year depending upon various factors such as the number of candidates appearing in an examination, the number of candidates qualifying an examination, difficulty level of the paper, and so on.

To have a list of all those colleges which you can get based upon your score, category, and state you can use JEE-Main College Predictor :-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

As you are preparing for JEE-Main then I would recommend you to check the resources made by our experts to help aspirants like you in the best and smart preparation of JEE-Main :-

https://learn.careers360.com/jee-main-coaching/?utm_source=%20QnA

I hope this information helps you.

Good Luck!!

Hello,

As per as the cut off of last year JEE Mains the cut for IIITDM Kancepuram mechanical for obc ncl candidate is 11480. Candidates can check the cutoff from the official website of the college as well as from the JOSAA counselling.

Hope it helps!

Yes, you may consider IIITDM Kancheepuram to be one of the better Technical Institutes for Mechanical Engineering in Tamil Nadu, next to IITM, NITT, COE Guindy and Anna University. The Institute has excellent infrastructure, faculty and research facilities besides having a huge locational advantage being located near Industrial Hubs of Chennai and nearby Madurai and Coimbatore as well as near Research Hubs like IITM Research Park. Top companies like TVS, Ashok Leyland, GE, Honeywell, L&T, Tractors India were main recruiters last season for Core Mechanical Engineering in Campus. The Institute has a strong curriculum at par with IITs and NITs and provides in depth Technical Education in Engineering, Design and Manufacturing.

For more information about IIITDM Kancheepuram do follow the link below

https://www.careers360.com/university/indian-institute-of-information-technology-design-and-manufacturing-kancheepuram