which college is better,cse at iiit sricity, ece at iiit kancheepuram and ece at iiit naya raipur?
Hello
iiit sri city ,chittoor.infrastructure of this college is good.coming to placements,highest salary package was 14 LPA and Average salary package was 3 to 4 LPA.
iiit kanchepuram ,tamilnadu..The fee structure of this college is 5.25 lakhs.infrastructure of this college is too good.coming to placements,the highest salary package was 51 LPA and average salary package was above 5 LPA. faculty of this college is too good.
iiit naya raipur .The fee structure of this college is 90,800 per year and hostel fee is 34,600.infrastructure of this college is good.Highest salary package is 43 LPA.average salary package was 8.60 lakhs per annum.
Based on placements and ranking iiit kanchepuram is better than these two colleges.
Hope this information helps you.
fee structure for St students in iiitdm kancheepuram 2020?
Hi Aspirant,
There is no need to pay for Tuition fee but you need to pay Hostel fee. If you join.
These are the points that they have mentioned in notification.
- +SC/ST students are exempted from payment of tuition fee irrespective of their parental income.
- Hostel is compulsory for all B Tech/DD students. If exemption is granted by the Institute, then day scholars will have to pay the above mentioned Institute fees (Except Hostel Fees).
If you still have query you can visit this link:
https://www.iiitdm.ac.in/img/UGAdmissions/Fees_Structure_for_2019-20_Fresh_Admission.pdf
I hope it helps you.
scholarship for St students in iiitdm kancheepuram
Hey!
the eligibility is :
• ST students who have secured admission in the notified Institutions according to the norms prescribed by the respective Institutions will be eligible for the scholarship under the scheme. • The student will be eligible to join only the list of Institution identified by Ministry. • The total family income of the candidate to be eligible for this scholarship from all sources should not exceed Rs.6.0 lakh per annum. • The scholarship shall be payable once the student has secured admission and started attending the classes. • The scholarship awarded, will continue till the completion of the course, subject to satisfactory performance of the student.
Financial Assistance for Scholarship-
• Tuition Fees- Rs. 2.5 Lacs per annum
• Books/Stationary- Rs. 3000 per annum
• Living expenses – Rs. 2200 per month
• Computer Accessories – Rs. 45,000/- one time assistance.
the form to be filled is in the link below
http://www.iiitdm.ac.in/old/pdf/commonscholarship.pdf
which is best going cse In cbit hyderabad Or in iiitdm kancheepuram? suggest me. and also about placement and package
Hi Aspirant,
Chaitanya Bharathi Institute of Technology (CBIT), Hyderabad is an autonomous institution approved by AICTE and was established in 1979 and was affiliated to Osmania University, Hyderabad. This college is better than Indian Institute of Information Technology Design and Manufacturing Kancheepuram.
CBIT Hyderabad stands at NIRF Ranking 124, whereas Indian Institute of Information Technology Design and Manufacturing Kancheepuram stands at NIRF Ranking 182.
CBIT Hyderabad is rated as AAAA rating college, whereas IIITDM Kancheepuram is rated as AAA+.
But in the terms of Placement and package, IIITDM Kancheepuram is better as its average package hovers around 5.45 lakhs, whereas CBIT Hyderabad average package hovers around 3.6 lakhs.
To Know more about the colleges, visit these links - https://www.careers360.com/colleges/chaitanya-bharathi-institute-of-technology-hyderabad
All the best.
ece in iiitdm kancheepuram or metallurgy, mining, chemical engineering in top 5 to 10 nits. suggest me!!!!
Hello aspirant,
It is best for you to choose iiitdm to pursue ECE course. This is best University. Following are the details:
Fee per semester is 60,000
Fee per 8 semesters will be 4,80,000
Admission fee is 500
Registration fee is 300
Other fee for 8 semesters is 40,000
So you total fee amount 5,20,000 to 5,30,000.
Placements are quite good with 30+ recruiting companies.
Highest CTC is 55Lpa.
My opinion is that you go to iiitdm.
Good luck..!!.
which is better, nit andhra pradesh mechanical or iiit kancheepuram ece or iiit naya raipur ece?
Hello Aspirant,
Both the NIT and IIIT's have great ratings since the past years and have most of the facilities in their respective college. Secondly coming to the selection of a branch you need to consider your field of Intrest first as both mechanical and ECE branch have great scope. Whereas mechanical branch has a tough competition and the scope for job opportunities are less compared to ECE because the number of students studying the course every year is high.
ECE is a course which presently have great scope and in the upcoming years many countries will be needing such professionals and with less competition in the field you could opt up the branch only of you have intrest in the field.
As ECE students would be getting lots of job opportunities in the future as compared to mechanical students.
Finally when compared with IIIT Kancheepuram and IIIT Naya Raipur, I would recommend you to go for IIIT Kancheepuram as the college has a great record of placements in the past years for students into famous companies with good salary packages.
So hope my answer helped you solve your query.
Good Luck
which is best ece in nit agartala Or in iiitdm kancheepuram?
Hello
Naveenv495
, From some research on internet about both the colleges I found that both the colleges are almost same infrastructure and placement but the fees is more at NIT but it is also a better college so if you have no issue with fees then go for NIT.
Hope it will be helpful for you :)
will iiit kancheepuram seats increase this year?as it is not offering dual degree onwards
Hi Aspirant!
There is no official notification released by IIIT Kancheepuram on its official website regarding increase in seats intake regardless there will not be any further offering for Dual degree.You can also visit its official website to double check the condition.
I hope it helps.
Happy Hustling!
how good is joining ECE in iiit kancheepuram?? answer in detail plzz
Hello Student,
IIITDM kancheepuram was established in 2007. Institute has well equipped laboratories, class rooms, library and hostel facilities,e tc
ECE department of this institution is well known for academic excellence and good placement record.Department of ECE offers IT enabled design
and manufacturing based curriculum,that helps the students to promote their problem solving skills and innovate new technologies. ECE Department offers interdisciplinary courses and projects for providing cross cutting knowledge to the students to pursue their interest.
In ECE department,well equipped laboratories train students both in software and hardware in the areas of Analog and Digital Circuits, Control Systems, Instrumentation Systems, Industrial Drives, VLSI, Embedded Systems, Digital Signal Processing Systems and Multilayer PCB Design.
95+ companies visiting the college campus for recruitment.but yes.. placement is also depends on one's skills and interest in that field.
I would say that ...this institution is good to pursue ECE
Hope this helps.
Good luck
metallurgy in nit rourkela Or cse in iiitdm kancheepuram which is best. along with placement and salary
Hey!
there are two parts in this answer. 1st is about comparing 2 colleges. 2nd is about course and placements. i would like to answer it from my point of view.
nit rourkela is a prestigious college. on the otehr hand iitdm kanchi is no way inferior. it is also a good college with good reputation. nit and iitdm both are cosly. one or the other way, they are costly. so it now depends completely on course and placements.
metallurgy is a growing branch, thus you could take up masters and then phd and go in research field so that you get a prestigious life. wherein cse is a branch which is in demand among students, which directly implies that there is going to be lack of jobs in the forth coming years. though there are lots of companies, getting a high paid job is difficult. where as in metallurgy, you can assure yourself of getting a job in top companies like, tata steels, sail etc. so there is no lack of jobs in metallurgy. there is a demand indeed.
if you have enough knowledge in metallurgy subject, you have a lot of jobs in foreign too. even in cse, if you have a lot of knowledge, then you might get placed in infosys, wipro and other top companies
so now its upto you to choose. no course is inferior. if you have enough knowledge, you shine. no one stops you from that.
i hope this helps you.
feel free to ask any doubts in the comments