Hello Aspirant,

As we go through the latest cut-offs of JEE-Main 2020 of JOSAA 6th round then it shows that you can get the following branches in NIT Trichy under Home state quota :-

• Chemical Engineering
• Civil Engineering
• Electrical and Electronics Engineering
• Instrumentation and Control Engineering
• Mechanical Engineering
• Metallurgical and Materials Engineering
• Production Engineering

You can check out the latest cut-offs from the link given below :-

https://josaa.nic.in/Result/Result/currentorcr.aspx

Note that the above prediction is made on the basis of latest cut-offs available on official website of JOSAA or CSAB and the cut-offs are bound to change every year depending upon various factors such as the number of candidates appearing in an examination, the number of candidates qualifying an examination, difficulty level of the paper, and so on.

To have a list of all those colleges which you can get based upon your marks, category, and state you can use JEE-Main College Predictor:-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

If you are preparing for JEE-Main 2022 then I would recommend you to check the resources made by our experts to help aspirants like you in the best and smart preparation of JEE-Main 2022 :-

https://learn.careers360.com/jee-main-coaching/?utm_source=%20QnA

You can also check out the JEE-Main 2021 cut-offs and know whether you have qualified for JEE-Advance 2021 or not, so it is given below :-

==>> Common Rank List (CRL) - 87.8992241-100.0000000 Percentile

==>> GEN-EWS - 66.2214845-87.8950071 Percentile

==>> Other Backward Classes (OBC-NCL) - 68.0234447-87.8950071 Percentile

==>> Scheduled Caste (SC) - 46.8825338-87.8950071 Percentile

==>> Scheduled Tribe (ST) - 34.6728999 87.8474721 Percentile

==>> PwD - 0.0096375-87.8273359 Percentile

You can check more details about JEE-Main 2021 cut-offs from the link given below :-

https://engineering.careers360.com/articles/jee-main-cutoff

I hope this information helps you.

Good Luck for your future!!

Hello Aspirant,

As we go through the latest cut-offs of JEE-Main 2020 of JOSAA 6th round then it shows that :-

Closing CRL rank for NIT Tiruchirappalli was :-

• Metallurgical and Materials Engineering branch - 42176 (Home state quota)

So you have quite good chances to get NIT Tiruchirappalli with Metallurgical and Materials Engineering

You can check out the latest cut-offs from the link given below :-

https://josaa.nic.in/Result/Result/currentorcr.aspx

Note that the above prediction is made on the basis of latest cut-offs available on official website of JOSAA or CSAB and the cut-offs are bound to change every year depending upon various factors such as the number of candidates appearing in an examination, the number of candidates qualifying an examination, difficulty level of the paper, and so on.

To have a list of all those colleges which you can get based upon your marks, category, and state you can use JEE-Main College Predictor:-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

If you are preparing for JEE-Main 2022 then I would recommend you to check the resources made by our experts to help aspirants like you in the best and smart preparation of JEE-Main 2022 :-

https://learn.careers360.com/jee-main-coaching/?utm_source=%20QnA

You can also check out the JEE-Main 2021 qualifying cut-off (expected) for JEE-Advance 2021 from the link given below :-

https://engineering.careers360.com/articles/jee-main-cutoff

I hope this information helps you.

Good Luck!!

Dear aspirant,

Vellore Institute of Technology is a private deemed university located in Vellore, India. Vellore Engineering College, the institution offers 64 Undergraduate, 35 Postgraduate, 16 Integrated, 2 Research and 2 M.Tech Industrial Programmes.

Mechanical Engineering Almost all the faculty members are PhD holders or are in the process of obtaining their PhD. Most of the faculty members are helpful and highly knowledgeable.Academic facilities and infrastructure are excellent here. It provides Wi-Fi, labs, classrooms and a library.

Placements The mechanical department has average placement record. Many students choose to sit for GATE and/or GRE exams and others opt for placements in the private sector. The highest package in core industry sector ranges from 9-12 LPA. Those you plan for IT sector jobs despite the mechanical degree (analyst role) fetch around 5-6 LPA.

For more information about VIT you can visit the link given below,

https://www.careers360.com/university/vellore-institute-of-technology-vellore/btech-mechanical-engineering-course

NIT Trichy is a government-run institution for higher education and advanced research, mainly in engineering and technology. It was started as the Regional Engineering College and is amongst the oldest establishments by the National Institutes of Technology (NITs) system. It has 17 departments that offer undergraduate and graduate programmes in engineering, management, humanities, and architecture.

Metallurgical Engineering The department of Metallurgical and Materials Engineering has been one of the premier centers of excellence in the field of Metallurgical and Materials Engineering. The college gives equal importance to studies and extra-curricular activities, thus developing the overall personality.

Placements The placements in this esteemed institute are far than good. Almost 90% of the students are being placed every year on an average. Good salary packages are offered. Almost Rs. 6 lakhs per annum is the offered package on an average.

For any other information about the Institute you can visit the link given below,

https://www.careers360.com/university/national-institute-of-technology-tiruchirappalli

Best of Luck.....

Hello Laxmi. You mentioned you are from GEN-EWS subcategory and you are interested to get admission to ECE in NIT, Trichy. As per your percentile your CRL-AIR should be within 79794 - 89700. Based on your rank and previous years' cutoff trends, it is less likely for you to get admission to ECE at NIT, Trichy. In 2020 , JEE Main Home State Cutoff Rank prescribed for admission at ECE for GEN-EWS in NIT, Trichy was 32452 (for Females) and 17948 (for males).

If you want to get detailed report on cutoff trends for NIT, Trichy, check out this article:

https://engineering.careers360.com/articles/jee-main-cutoff-for-nit-trichy

Or, alternatively, you can check out this page as well:

https://www.careers360.com/university/national-institute-of-technology-tiruchirappalli/cut-off

To get a detailed report on your eligibility for various streams at different colleges based on your rank, feel free to use JEE Main 2021 College Predictor:

https://engineering.careers360.com/jee-main-college-predictor?ici=nav-header_engg&icn=jee-main_cp-lp

I hope you find this information helpful.

Thank you and all the best!

Hi,

It's quite difficult to predict whether you will get NIT, Trichy with 185 marks or not. The Rank of JEE depends on percentile. Since there are multiple shifts in JEE , the difficulty level of paper also changes.This results in sometime students getting higher percentile with less marks relatively. Because of this reason, it is quite difficult to predict what rank and college will a student got on the Basis of JEE Main marks.

Thanks!!!

Hi,

If you have choice between these two Institutes ,then you should go for NIT Trichy. Both are good institutes but NIT Trichy is better than VNIT Nagpur. Since you belong to Nagpur ,you may want to be VNIT Nagpur but if you chose NIT Trichy, there is no harm. You may have to live away from home in hostel, but it is experience one should take and it is worth.

Thanks!!!

Hey,

Based on your percentile,  your overall rank would be around 54628-61410. For the branch cs, the last year cut off was around 1520(home state) and 198(other state) for sc category at NIT Trichy. So the chances of getting into this college is less considering the last year cut offs. You can consider other top colleges too. You can use the JEE Main predictor tool in order to find other best colleges as per your rank.

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

Hello Aspirant,

As we go through the latest cut-off of 2020 then it shows that the closing CRL rank was 42176 for Metallurgical and Materials Engineering branch in NIT Trichy under state quota for General/Open category.

Now to secure such rank you should have your JEE-Main  score at least 120+ marks out of 300 and percentile against this should be around 97.8+.

You can check out the latest cut-offs from the link given below :-

https://josaa.nic.in/Result/Result/currentorcr.aspx

You can check out marks Vs ranks Vs Percentile from the link given below :-

https://engineering.careers360.com/articles/jee-main-marks-vs-percentile

Or

You can also use JEE-Main Rank Predictor to predict your rank :-

https://engineering.careers360.com/jee-main-rank-predictor

Note that the above prediction is made on the basis of latest cut-offs available on official website of JOSAA or CSAB and the cut-offs are bound to change every year depending upon various factors such as the number of candidates appearing in an examination, the number of candidates qualifying an examination, difficulty level of the paper, and so on.

To have a list of all those colleges which you can get based upon your score, category, and state you can use JEE-Main College Predictor :-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

As you are preparing for JEE-Main then I would recommend you to check the resources made by our experts to help aspirants like you in the best and smart preparation of JEE-Main :-

https://learn.careers360.com/jee-main-coaching/?utm_source=%20QnA

I hope this information helps you.

Good Luck!!