The Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation by Swayam offers theoretical as well as practical aspects of optical spectroscopy and microscopy. The programme will give an understanding in depth about the principles governing the light-matter interaction. The usage of equipment in part by part laboratory settings will be shown in detail. The types of lasers and their applications will also be illustrated in the course.
The Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation training course is free of charge. The candidates can avail the course on the Swayam platform. The course is accredited by the Indian Institute of Science Bangalore and NPTEL. The course offers books and references on the course website. The candidates will be graded in their assignments and final exams. The course tries to gap the divide between the advantaged and disadvantaged group of people through free quality education.
The Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation certification can be availed in the digital format. The certification will have logos of the Indian Institute of Science Bangalore. The certification can be shared on all online platforms such as Linkedin.
The Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation fees detail is in these following points-
The course can be accessed for free.
The optional examination fee for this course will be Rs. 1000
Fee category
Amount in rupees
Course fee
Free
Certification exam fee
Rs. 1000
Eligibility Criteria
Certification qualifying details
To avail of the certification of Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation online course, the candidates will have to register for the certification examination. The candidates will have to submit all the assignments and must score a minimum grade of 10. The candidates will also have to score a minimum grade of 30 in the final proctored exam.
What you will learn
Knowledge of physics
The Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation certification course learning outcomes is as follows-
The academic and industrial usage of optical instruments will be shown on the course website.
The inner workings of the optical instruments will be elaborated on in the course.
The candidates will be taught the foundations and origins of spectroscopy.
The concept of light-matter interaction will be illustrated to the candidates.
Both the theoretical and practical aspects will be covered as the Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation certification syllabus.
The usage and correct procedures of lasers will be discussed in detail.
An in-depth study of the basic principles of equipment will be given to the candidates.
The ways to measure properties specifically about absorption spectrometers will be discussed.
The candidates will learn how to build parts from individual equipment in the lab setting.
Who it is for
The Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation certification benefits can be availed by the following candidates-
The candidates who have studied Life science will find relevance in this course.
The candidates who have studied subjects such as Photonics and instrumentation can also apply for this course.
The students who are in their post-graduation must apply for this course.
Individuals with great interests in optical spectroscopy and microscopy must apply.
Admission Details
The interested participants for the Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation certification course can follow the following steps-
Transition probability in light matter interaction
Beer Lambert relation
Einstein's phenomenological treatment
A and B coefficients
Spontaneous emission
Origins of fluorescence
Nature of Fluorescence
Emission spectrum
Absorption spectrum
Anisotropy
Lifetime
FRET
Second quantaisation
Creation and annihilation operators
Fock states
Light matter interaction in Feynman diagrams
Spontaneous emission origin
Stimulated Emission origin dependence through Fock states
Laser emission
Two state, three state and four state laser systems
Real world lasers
Characteristics of laser emission
Threshold behavior
Laser gain equation
CW operation
Pulsed lasers
Q Switching
Mode locking
Saturable absorber
Laser induced fluorescence
Optical components (lenses, mirrors, gratings, prisms) and their working principles
Interference filters
Dichroic filters
Efficiency calculations for SNR improvement
Aligning an optical equipment
Intro to optical hardware
Common opto-mechanical assemblies
Setting up a simple laser based spectrometer using gratings in lab
Calibration and acquisition of fluorescein spectra
Principles of photo detection
QE
Dynamic range shot noise
Photodetectors – PMTs
Photodiodes
Photo resistors
Understanding common metrics and specs
Detection electronics – preamps, A2Ds
Area detectors
CCDs, emCCDs, sCMOS, comparison, read noise, speed and other sensor characteristics
Theory of Image formations – widefield microscopy, bright field, phase contrast, DIC and fluorescence microscopy
Scanning system: Principles of scanning system
Gaussian light propagation and focussing
Optical resolution
Definition in xy and z
Measurement and characterisation in the lab
Scanning as time averaged focus
Optical hinges
Imaging of hinges
Confocal microscope
Instructors
IISc Bangalore Frequently Asked Questions (FAQ's)
1: Is there any prerequisite for the Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation programme?
No, there isn’t any prerequisite shown in the Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation programme course website.
2: Where can I gather information about future Swayam courses?
The candidates can follow the social media accounts of Swayam on Instagram, Facebook, or Twitter. Updates about Swayam’s future courses will be posted on these social media handles.
3: What are the subject categories this course falls under?
This course falls under the subject categories of Chemistry, Photonics, Physics, Biological Sciences & Bioengineering.
4: What industries do this programme support?
This programme supports industries such as Leica, Carl Zeiss, Olympus, Nikkon, Optica, Holmarc, and DSS Image Tech.
5: Who offers the course, NPTEL or Swayam?
This Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation online course is offered in the Swayam platform by NPTEL.
6: What is the use of Swayam’s credit transfer system?
According to the UGC 2016 regulations, the courses done on Swayam’s platform can be transferred to the academic records of the students. The Universities are ought to recognise and transfer the course credit.
7: Where can I access more information about AICTE?
The candidates must go to the “About Swayam” section on the course website. In the bottom left corner of the page, the candidates can go through the AICTE pdf.
8: Which level of students can pursue this course?
The Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation training can be pursued by students of Postgraduate level.
9: What should be my total score to avail of the certificate?
To avail of the certificate, the total score must be 40 out of 100. The criterion for the certificate is to score 10 in assignments and 30 in the final exams. If the candidates failed to maintain these two scores, they won’t receive the certificate even if the score is 40 out of 10.
10: How can I access the course and certificate without paying anything?
The candidates can access the course without paying anything. But the candidates will have to pay 1000 rupees as the Optical Spectroscopy And Microscopy: Fundamentals of Optical Measurements And Instrumentation fees for the certification examination.