Online Electronics And Communication Engineering Courses & Certifications

The Transmission Lines and Electromagnetic Waves by Swayam online course focus on helping the candidates learn to write simple programs and visualize and experiment with them. The topics are analytical and computational. The analytical content will introduce the candidates to EM through transmission lines. Computational content will facilitate the visualization of the candidates. The concepts of EM will be taught broadly through transmission line theory. Practical learning will be emphasized by experimenting with codes. 

This course is initiated by the government of India. The Swayam platform offers NPTEL accredited courses verified by IITs. This course is verified by the Indian Institute of Technology Madras. The course provides re-certification. The course offers to bridge the gap between the advantaged and disadvantaged by providing them with quality education. It is an AICTE approved course.

The Transmission Lines and Electromagnetic Waves certification offers shareable flexibility. It will have logos of NPTEL and the Indian Institute of Technology Madras. The certification will specifically help master students and Ph.D. students in their academics. It will also profit the professionals in their work.

The Advanced Microwave Guided-Structures and Analysis online course is a 12 weeks online program offered by Swayam, an initiative by the Government of India’s Ministry of Education. The course starts with an introduction to the full characterisation of Scattering Matrix Parameters. Following that, Maxwell's Equations are addressed in both time-harmonic and instantaneous versions. 

The Advanced Microwave Guided-Structures and Analysis training covers the wave function in a homogeneous medium and radiated fields from a current source in a continuous medium, in terms of electric and vector potentials/scalar magnetic.

Advanced Microwave Guided-Structures and Analysis syllabus covers the phenomena of transmission and wave reflection at dielectric and conducting surfaces and investigates oblique and normal incidences. The course covers a detailed analysis of the rectangular waveguide in terms of power flow, modes of propagation, and power dissipation.

The Control and Tuning Methods in Switched Mode Power Converters online course is a 12 weeks program offered by Swayam. Switch-mode power converters (SMPCs) are critical components in energy-efficient power conversion in developing applications such as electric cars, renewable energy, data centres, industrial automation, and so on. In this context, selecting appropriate modulation and control techniques for SMPCs is critical in order to fulfill demanding criteria such as efficiency, transient performance, line, and load management, disturbance rejection, etc. The Control and Tuning Methods in Switched Mode Power Converters training cover all the associated topics and techniques.

While the bulk of commercial regulator implementations are focused on small-signal analysis and pulse width modulation, rising switching frequencies, which are linked in part to bandgap devices, allow for increased operational bandwidth and improved performance. This Control and Tuning Methods in Switched Mode Power Converters syllabus give an introduction to traditional control and modulation methods, highlights small-signal performance constraints, compares controller tuning methodologies, and examines large-signal control approaches. The analysis of tuning approaches demonstrates how large-signal-based classification tuning methods may greatly enhance SMPC efficiency and performance, followed by the requirement for mixed-signal and digital control implementation.

This Computational Electromagnetics online course is designed for senior undergraduates and first-year graduate students who have completed a semester in Engineering Electromagnetics. The Computational Electromagnetics training provides mathematical formulations of the primary methods now in use by the various communities: Finite Element Method, Integral Equations Methods, and Finite Difference Time Domain Method. These approaches are demonstrated by their application to scattering and impedance calculation/antenna radiation issues.

The Computational Electromagnetics syllabus covers calculating mutual coupling between antennas, Introduction to inverse problems, determining the electromagnetic patterns of a waveguide, the Integral Equation Method, and approaches for combining the Finite Element Methods. Programming problems encountered during the implementation of these solutions will also be discussed.

The ‘Op-Amp Practical Applications: Design Simulation and Implementation’ online course is offered by the Swayam platform, an initiative by the ministry of education in India. This design-based program is developed and structured by the ‘National program of Technology Enhanced Learning(NPTEL) and the Indian Institute of Science in Bangalore(IISC).

This is an elective course provided for the students and faculty in the engineering domain who will develop their skills and expertise in circuit designs. 

The course educator for this online training program on Op-Amps is Dr. Hardik J. Pandya who is an assistant professor from the department of electronics systems engineering which is under the division of electric sciences in IISC, Bangalore. The program is part of the electrical, electronics, and communications engineering that will fetch the students with three credit points. 

The ‘Op-Amp Practical Applications: Design Simulation and Implementation’ is a certification program that is scheduled for twelve weeks for the candidates of the course.

The Design of photovoltaic systems online course is a faculty development program advocated by the AICTE and is developed by the National Programme of Technology Enhanced Learning and the Indian Institute of Science in Bangalore. This design-based program is an elective course and a part of electrical, electronics, and communication engineering.  

In this course, the learners gain an understanding of the functioning of the photovoltaic cell and its design system and structure. The program is organized for a period of twelve weeks and the course educator for this course is a faculty from IISC, Prof. L. Umanand from the department of electronics systems engineering. The course curriculum provides three credit points and levels of the undergraduate or postgraduate standard for the students. 

The Design of photovoltaic systems training provides an opportunity for the students to discuss the principles of electrical features and coordination in the PV cells and circuits through an experiential learning process.

The ‘Fabrication Techniques for MEMs-based sensors: clinical perspective’ online course is provided on the online education portal, Swayam by the ministry of education in India. This course is a faculty development program accredited by the AICTE and is developed and offered by the National Program for Technology Enhanced Learning(NPTEL) in partnership with the Indian Institute of Science(IISC), Bangalore.

The fabrication techniques program is an elective course that is scheduled for a period of twelve weeks and is part of the electrical, electronics, and communications engineering domain. The students of this course will get an opportunity to explore the aspects of fabrication and microengineering. The course instructor for this undergraduate-level training program is Prof. Hardik Jeetendra Pandya from the department of electronics systems engineering in the division of electrical sciences. 

In this course, the students will gain an experiential understanding of the techniques and principles while also receiving the three credit points and the Swayam course certificate that consists of the logos of NPTEL and IISC.

The Integrated Photonic Devices and Circuits training program is offered by the Indian Institute of Technology Madras and is a National Program for Technology Enhanced Learning online free course. The online course is a faculty development program approved by the All India Council for Technical Education and is provided on the online free education portal, Swayam which is an initiative of the ministry of education in India.

This elective course is conducted for twelve weeks by students of engineering by Prof Bijoy Krishna Das faculty of the department of electrical engineering in IIT Madras. The course provides three credit points to the students after completing the course successfully. The undergraduate and postgraduate level program enables students to gain a theoretical and practical learning experience of the ideas and aspects of integrated photonics devices and circuits. The students are issued with the course completion certificate with the logos of NPTEL and IIT Madras which explains the acknowledgment.

The ‘Stochastic Modeling and the Theory of Queues’ training is a National Program for Technology Enhanced Learning online course offered by the Indian Institute of Technology Madras on the Swayam online education portal. This online program is provided for free as an elective course for the students of postgraduate level and research scholars.

The online course on stochastic modeling and queuing theory is scheduled for a period of twelve weeks and the course study is led by Prof Krishna Jagannathan, an assistant professor in the department of electrical engineering at IIT Madras.

The students of this course will get an opportunity to discuss detailed concepts and principles associated with the domain of electrical, electronics, and communication engineering and communication and signal processing. The learners will gain three credit points after completing this ‘Stochastic Modeling and the Theory of Queue program and a course completion certificate which consists of the logos of NPTEL and IIT Madras. 

The ‘Enclosure design of electronics equipment’ online course is about the process and techniques of product designing of electronic equipment and devices. This program is a National Program for Technology Enhanced Learning(NPTEL) online certification course and is developed and offered on the Swayam online education portal by the Indian Institute of Science (IISC) Banglore. This faculty development program on electronics design is approved by the AICTE and aids in the skill development of the candidates in the field of electrical engineering, and electronics and communication engineering. 

The learners of this course will gain three credit points after completing the course study guided by the IISC faculty, Prof .V.Chalapathi Rao from the department of electronics systems engineering in IISC. The course on ‘Enclosure design of electronics equipment’ by Swayam aids in the discussion of issues in the mechanical aspects of electronic equipment design and prototyping. This online elective NPTEL course is conducted for twelve weeks for undergraduate and postgraduate level students.

The ‘Power system analysis’ course is offered by the Indian Institute of Technology Kharagpur through the Swayam online education portal. It is a National Program for Technology Enhanced Learning(NPTEL) online free course for the students pursuing their bachelor’s or master’s degree in electrical engineering.

The course helps the students gain comprehensive knowledge of per-unit systems and circuit system applications. This faculty development program by IIT Kharagpur is conducted for twelve weeks and is approved by the All India Council for Technical Education. The undergraduate-level course is guided by Dr. Debapriya Das from the department of electrical engineering at IIT Kharagpur. The course which is a part of the Electrical, Electronics and Communications Engineering, and  Power Systems and Power Electronics domains enables students to earn three-course credits. The course certificate received after completion of the ‘Power system analysis’ online training consists of NPTEL and IIT Kharagpur logos that represent its authenticity. 

The ‘Analog Electronic Circuits’ online course is a study about metal-oxide-semiconductor field-effect transistors (MOSFET) and their applications in analog circuits. This is a National Program on Technology Enhanced Learning(NPTEL) free online training course provided by the Swayam under the ministry of education in India initiative. This program is developed and offered by the Indian Institute of Technology Delhi and the online classes are held for twelve weeks.

This faculty development program is a core course for undergraduate level students belonging to the domain of electrical, electronics, and communication engineering, or control and instrumentation, and VLSI design. The AICTE approved curriculum is instructed by the course educator, Dr. Shouri Chatterjee from the department of electrical engineering at IIT Delhi.

In the ‘Analog Electronic Circuits’ training program, the students will receive three credit points and a course completion certificate which is e-verifiable with the logos of NPTEL and IIT Delhi.

The ‘Linear Systems Theory’ online course is a study about linear systems and control associated concepts in control engineering. This course is a National Program for Technology Enhanced Learning free online program provided on the Swayam education portal. The course curriculum is developed and offered by the Indian Institute of Technology Madras.

The online program is scheduled for twelve weeks and is an elective course for undergraduate and postgraduate level students. This course which is a part of the electrical, electronics, and communication engineering along with control and instrumentation domain is a faculty development program that is approved by the All India Council for Technical Education.

The course educator for this online certification course is Prof Ramkrishna Pasumarthy from the department of electrical engineering at IIT Madras. The ‘Linear Systems Theory’ training program will allow students to gain three credits and an e-verifiable course completion certificate after completing the course.

The ‘Principles and Techniques of Modern Radar Systems’ is a study about the multisystem of radars in electronics engineering. The radar system principles program is a National Program for Technology Enhanced Learning Program that provides free online training to the students pursuing their undergraduate and postgraduate levels in electrical engineering, electronics and communication engineering, or communications and signal processing, on the Swayam education platform.

This elective course is offered by the Indian Institute of Technology Kharagpur for twelve weeks by the course instructor, Dr. Amitabha Bhattacharya, an associate professor from the department of electrical, electronics, and communication engineering at IIT Kharagpur.

The ‘Principles and Techniques of Modern Radar Systems’ online training program is approved by the All Indian Council of Technical Education and allows the students to gain three credits after completion of this course. The candidates of this faculty development program can avail of the certificate which is e-verifiable containing the logos of NPTEL and IIT Kharagpur. 

The ‘Electrical Measurement and Electronic Instruments’ online course is about the functioning and principles of various kinds of electro-mechanical instruments. This is a National Program for Technology Enhanced Learning online course by the online education platform Swayam. The online course is developed and organized by the Indian Institute of Technology Kharagpur.

This NPTEL free online course is conducted for twelve weeks and is a core course for the students of undergraduate level. It is categorized under the domain of electrical, electronics, and communication engineering, control, and instrumentation along with power systems and power electronics. The course instructor for the All India Council for Technical Education (AICTE) approved online program is Dr. Avishek Chatterjee from IIT Kharagpur. 

The ‘Electrical Measurement and Electronic Instruments’ training program enables the students to gain three credit points and provides the eligible students with an e-certificate with the logos of NPTEL and IIT Kharagpur after course completion.

The Network(RAN) Performance & Optimization Training Course is a 12 week long course that focuses on the concepts of LTE network design and LTE optimization. The course offered on the Skill-Lync platform provides a detailed understanding of different LTE KPIs and throughput KPIs.

The Network(RAN) Performance & Optimization Live Course is delivered with the help of video lectures and informative course content. The course makes use of technical projects and industry-relevant cases of Network (RAN) Performance and Optimization.

After successfully completing the Network(RAN) Performance & Optimization Certification Course, all learners will be rewarded with a course certificate and the top 5% will be granted a merit certification.

The Developing IoT Applications Online Course is a 12 week long course that provides specialized knowledge on Internet of Things (IoT) applications. The course provided on the Skill-Lync platform discusses the basic building blocks of IoT and the different technologies employed in IoT.

Through the Developing IoT Applications Training Course, learners will get a platform to develop end-to-end applications using IoT in various engineering domains. Through video lectures and technical projects, learners will be introduced to theoretical and practical applications of IoT.

After completion of the Developing IoT Applications Certification Course, learners will receive a certificate of completion and the top 5% of a class will get a merit certificate. There is a one-on-one course demonstration available for the course.

The study of networks here in Communication Networks Certification calls for an understanding of network topologies, protocols, or algorithms that handle various information-exchange tasks or subtasks as well as tools for network design and performance analysis.

The properties and structure of communication networks are covered in detail in Communication Networks Classes to enable the back-and-forth movement of a physical entity, any network containing nodes and branches in any data communication and computer networks. 

All students get a Communication Networks Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

Signal Processing Techniques And Its Applications Certification is that the information that they contain can be displayed, analyzed, or converted to another type of signal that is useful. In the practical world, analog products detect signals such as sound, light, temperature, or pressure and manipulate them accordingly to their usage.

Signal Processing Techniques And Its Applications Classes teach about the modern applications that have penetrated a wide range of systems, such as consumer electronics, digital communications, medical imaging, and so on.

All students get a Signal Processing Techniques And Its Applications Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

Principles of Communication Systems - I Certification begins with various basic tools such as Fourier Series/Transform,  along with other significant modulation techniques like such as Amplitude Modulation, Frequency Modulation, Phase Modulation etc. Sampling process and Quatization, including Nyquist criterion and reconstruction of the original signal from the sampled signal will be dealt with in the later parts of the course.

Principles of Communication Systems - I Classes are intended to serve as a foundational course for introducing the students to various dimensions of probability from the perspective of contemporary digital and wireless communications. It includes ideas in probability and random variables/processes.

All students get a Principles of Communication Systems - I Certification from the Indian Institute of Technology Kanpur (IIT Kanpur) under the Swayam Initiative by the Government of India. 

The primary purpose of Analog Electronic Circuits Certification is to serve as a foundational course for undergraduates and as a refresher course for graduate students and circuit designers employed in the industry.

It strikes the ideal mix between theory and practice in Analog Electronic Circuits Classes so that the studied circuits can be built in a laboratory course for undergraduates and their measured performance can be easily compared to the theoretically expected performance. It boosts theoretical confidence. 

All students get an Analog Electronic Circuits Certification by the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam initiative by the Government of India.

An in-depth comprehension of sampling, reconstruction, and sample rate conversion using multi-rate building blocks is part of the Multirate DSP Certification. Multiple sampling rates are referred to as multi-rate and are used by a multi-rate DSP system inside the specified system. 

Multirate DSP Classes will be giving a brief outline of the course and also an introduction to the elements of the course as it has a lot of very practical and intuitive applications and will be very helpful in understanding why multi-rate signal processing is beneficial to us.

All students get a Multirate DSP Certification from the Indian Institute of Technology Madras (IIT Madras) under the Swayam Initiative by the Government of India. 

Circuit Analysis for Analog Designers Certification program is designed to cover the circuit analysis areas that a working analog designer needs to know. Aspiring analog designers are introduced to more complex concepts including inter-reciprocal networks, analog filters, and circuit noise analysis.

Transmission lines, distributed circuits, and the analysis of circuits with modest nonlinearities are all covered in detail in the Circuit Analysis for Analog Designers classes. 

All students get a Circuit Analysis for Analog Designers Certification from the Indian Institute of Technology Madras (IIT Madras) under the Swayam Initiative by the Government of India. 

Operation and Planning of Power Distribution Systems Certification provides a general overview of modern power distribution systems commencing with explanations of various power distribution system components and configurations, load models, various reliability evaluation methods, and various power distribution planning approaches.

Operation and Planning of Power Distribution Systems Classes will give an overview of the historical development of the electrical power system and especially the Indian power system - how it evolves centuries ago and how it is in its present shape.

All students get an Operation and Planning of Power Distribution Systems Certification from the Indian Institute of Technology Guwahati (IIT Guwahati) under the Swayam Initiative by the Government of India.

Design and Analysis of VLSI Subsystems Certification introduces students enrolled in this course to a detailed introduction to the topics of designing Digital CMOS VLSI subsystems utilizing delay, power, and area design metrics.

More emphasis is placed on power estimation, interconnect-aware designs, and discussions of a few power-benefitting designs in the Design and Analysis of VLSI Subsystems Classes.

All students get a Design and Analysis of VLSI Subsystems Certification by International Institute of Information Technology Bangalore (IIIT Bangalore) under the Swayam Initiative by the Government of India. 

Physics of Nanoscale Devices Certification will introduce students to the basic physics of novel miniaturized i.e mesoscopic and nanoscopic devices.

Physics of Nanoscale Devices Classes would start from the basics of quantum mechanics and equip the students to delve into advanced topics in nanoscale devices. Devices that were thought to be beyond the reach of engineers can now be fabricated in new ways. The crucial factor has been the development of newer techniques by which extremely narrow rods, or nanowires, of a semiconductor can be formed. 

All students get a Physics of Nanoscale Devices Certification by Indian Institute of Technology Roorkee (IIT Roorkee) under the Swayam Initiative by Government of India.

The Digital Control in Switched Mode Power Converters and FPGA-based Prototyping certification course pioneers Digital Control and FPGA-based Implementation for Switched Mode Power Converters. This course caters to power electronics industry practitioners. Covering benefits, simulation, modelling, Verilog HDL, and practical implementations, it offers insights into digital control's evolution and industry demands.

Industry giants like STMicroelectronics, Qualcomm, and Texas Instruments support the Digital Control in Switched Mode Power Converters and FPGA-based Prototyping certification by Swayam. It requires a background in Electrical/Electronics Engg., exploring diverse aspects of digital control, empowering students with skills pertinent to contemporary power electronics trends and fostering academic-industry collaborations.

The Digital Image Processing certification course explores techniques and algorithms for enhancing digital images, addressing applications in human perception and autonomous machines. With a 12-week duration, the course is categorised as an elective, for both undergraduate and postgraduate levels. Industry support from defense labs like DRDO and ISRO highlights its practical relevance.

The Digital Image Processing certification by Swayam delves into enhancing image quality for human perception and applications in autonomous machines. It requires a foundation in Digital Signal Processing, making it suitable for both undergraduate and postgraduate levels. Industry support from DRDO, ISRO, and TCS underlines its practical significance.

Also Read: Online Digital Image And Video Processing Certification Courses