Swayam Electronics And Communication Engineering Courses & Certifications

The Concentration inequalities online course is an 8 weeks program offered by Swayam, the government of India’s education ministry initiative. It is generally known that functions containing a large number of unpredictable integers act more predictably and less arbitrarily than their components.

Top-notch faculty from the Indian Institute of Science, Bangalore delivers the Concentration inequalities classes lectures. The course also provides candidates with a government-approved certificate via Swayam, Candidates must register and take the proctored in-person exam offered by the course provider at one of the approved testing centres which costs Rs 1000.

This graduate-level Concentration inequalities training on concentration inequalities addresses the fundamentals of the subject while also introducing advanced themes and approaches. Applications from computer science, electrical engineering, and statistics will be used to demonstrate the utility of the derived inequalities. 

The Concentration inequalities syllabus covers the following topics:

• Chernoff bounds: Hoeffding’s inequality, Bennett’s inequality, Bernstein’s inequality
• Introduction & motivation: Limit results and concentration bounds
• Variance bounds: Efron-Stein inequality, Poincáre inequality
• Isoperimetric inequalities
• The transportation method
• The entropy method and log Sobolev inequality
• Other special topics

Advances in UHV Transmission and Distribution certification is an 8 weeks course. This course is launched with the help of NPTEL and IISc Bangalore on the platform of Swayam. This certification course with 2 credits actually introduces the students to the current advances in the transmission and distribution systems of EHV/UHV. Also, this online course helps candidates secure certificates after sitting for a proctored test at the end of the course.

Advances in UHV Transmission and Distribution training programme will start by having a discussion on the importance of the transmission of EHV or UHV, how it is growing now vs how it will be in the future. The entire syllabus in the different UHV transmission components like its design elements and substances will be covered with the help of practical, and theoretical lectures, and videos that are topped off with assignment exercises, and demonstrations. 

The Dc Microgrid and Control System online course is an 8 weeks program provided via Swayam, an Indian government’s education ministry initiative. The elective course lecture is provided by the top faculty of IIT Roorkee.

This Dc Microgrid and Control System training is appropriate for PG students who study system and control, power systems, and power electronics. The course explains the essential principles of microgrids and their components, as well as the many types of microgrids and the benefits of microgrids over the central conventional grid. 

The Dc Microgrid and Control System syllabus specifically explain broad ideas and applications, control techniques, and the principles of functioning of DC microgrids. The course is ideal for researchers and students in the power system fields who want to do research in the rapidly developing and rising renewable energy technologies.

The Design for the internet of things online course is an 8 weeks program offered by the course provider Swayam, an initiative by the government of India. The course includes an overview of IOTs, as well as the creation of smart devices that enable ubiquitous and collaboration services. The Design for the internet of things training emphasizes the importance of design for durability and energy efficiency and introduces the system design step by step. Candidates will be shown short video clips, allowing students to prototype. The candidate is expected to select the appropriate software, hardware, and protocols for the suggested application at the conclusion of the course. The postgraduate level Design for the internet of things syllabus includes IoT introduction, application, definition, and challenges of IoT such as power, unique ID, location, security, etc.

The Digital Switching online course is an eight weeks course offered by Swayam, an Indian government initiative by the ministry of education. The duration of the AICTE-recognized undergraduate/postgraduate stage FDP course lasts 8 weeks and is worth 2 credit points. Digital Switching training will teach students the fundamentals of digital telephony. It will begin with a crossbar switch and go through switch theory. The fundamentals of packet switching will be covered at the conclusion. The Digital Switching syllabus covers various topics such as strowger exchange, basic signaling, crossbar, banyan networks, crossbar operation algorithm, ShuffleNet, delta network, etc.

The Electrical Distribution System Analysis online course is offered by Swayam. A power distribution system's structure and load patterns differ substantially from those of a transmission system. Furthermore, with the introduction of distributed storage, and smart generation grid technologies, distribution networks are shifting from passive to active.

As a result, analytical techniques designed for transmission systems will not be immediately relevant to distribution networks. This Electrical Distribution System Analysis training will cover components (distribution transformer, feeders, regulators, loads, capacitors, storage, distributed generation, etc.), analysis(short-circuit, load flow, etc.), and modeling methodologies created specifically for the distribution system.

The Electrical Distribution System Analysis syllabus includes Distribution feeder configurations, the Computation of transformers, distribution transformers, overhead lines, cables and feeders, distribution system analysis, load flow analysis, etc.

The Hardware modeling using Verilog online course is offered by Swayam, an initiative by the Ministry of Education, Government of India. In this course, candidates will be introduced to the Verilog hardware description language during the course. The Hardware modeling using Verilog training will assist them in learning about various issues of digital circuit designing using Verilog and developing test benches. Hardware modeling using the Verilog syllabus covers digital circuit design, Verilog variables, modeling sequential circuits, modeling issues like memory, pipelining, and several case studies.

The ‘System Design Through VERILOG’ online course is a study about the fundamentals and the techniques used in Verilog, a hardware description language for design and synthesis. This is an elective course for the students who are at the undergraduate and postgraduate levels provided on the Swayam online education platform. The National Program for Technology Enhanced Learning (NPTEL) free course is developed and offered by the Indian Institute of Technology Guwahati.

The course instructor for this All India Council for Technical Education(AICTE)  approved course is Prof. Shaik Rafi Ahamed from the IIT Guwahati. The course is categorized under the domain of electrical engineering, electronics, and communications engineering along with VLSI design. The students of the ‘System Design Through VERILOG’ training course can earn two credit points and a course certificate consisting of the authenticated logos of NPTEL and IIT Guwahati.

The online program is conducted for the students, faculties and industry professionals for eight weeks.

Basic Building Blocks of Microwave Engineering & Design Principles of RF And Microwave Filters And Amplifiers Certification will introduce students to the three basic building blocks of microwave engineering namely microwave transmission system, passive circuit components at microwave frequency level and microwave active devices.

Basic Building Blocks of Microwave Engineering & Design Principles of RF And Microwave Filters And Amplifiers Classes will make an effort to emphasise the necessity for a basic understanding of the building blocks in somewhat detail so that fundamental design principles behind a microwave network. 

All students get a Basic Building Blocks of Microwave Engineering & Design Principles of RF And Microwave Filters And Amplifiers Certification by Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by Government of India. 

VLSI Signal Processing Certification is important for the future as digital signal processing (DSP) has emerged as the single most key component in all electronic applications such as multimedia and mobile communications, video compression, network cameras, smartphones, radar imaging, GPS, biomedical signal processing, etc to name just a few. 

VLSI Signal Processing Classes will start with topics such as the graphical representation of DSP algorithms. Also covering graphs used like Signal Flow Graph (SFG), Data Flow Graph (DFG), and lastly dependence graph.

All students get a VLSI Signal Processing Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

Fundamentals of MIMO Wireless Communication Certification is a radio communications technology or RF technology that is being used in many new technologies these days such as Wi-Fi, LTE (Long Term Evolution) radio, wireless, RF, and many other technologies.

Fundamentals of MIMO Wireless Communication Classes teach candidates about newer MIMO wireless technology that provides increased link capacity and spectral efficiency combined with improved link reliability using what was previously seen as interference paths.

All students get a Fundamentals of MIMO Wireless Communication Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

Design of Power Electronic Converters Certification is about the basics of power electronics, different types of power converters that are used in industry, and their applications such as DC/DC, AC/DC, DC/AC, and AC/AC Converters. It mainly converts the electrical energy of one type into another with different characteristics and is used to drive any device that requires an input of electric power other than that supplied by the primary power source.

Design of Power Electronic Converters Classes covers the basics of Power Electronics Types of Power Converters and their usage in the optimization of algorithms that select optimal parameters and components.

All students get a Design of Power Electronic Converters Certification from the Indian Institute of Technology Guwahati (IIT Guwahati) under the Swayam Initiative by the Government of India. 

Digital Protection of Power System Certification begins with a state-of-the-art survey of theories and methods of digital/numerical relays and phasor measurement units (PMUs) along with IEC 61850 substation and automation protocols.

Digital Protection of Power System Classes gives a theoretical overview and examples of practical engineering solutions to a range of technical issues, including load shedding and frequency relaying, reclosing and synchronizing, protection problems caused by the interconnection of distributed energy resources in the grid, and digital protection of various electrical apparatus, such as generators, transformers, transmission lines, etc.

All students get a Digital Protection of Power System Certification from the Indian Institute of Technology Roorkee (IIT Roorkee) under the Swayam Initiative by the Government of India. 

The Introduction to Adaptive Signal Processing certification course delves into the vital realm of adaptive filters, pivotal in contemporary signal processing, communication, and control applications. Its versatility in handling unpredictable data conditions makes it indispensable in areas like radar, sonar, wireless communications, and more. 

Tailored for students in various disciplines, the Introduction to Adaptive Signal Processing certification by Swayam introduces adaptive filters, closely tied to neural networks and machine learning. The eight-week elective course, backed by industry giants like Qualcomm and DRDO, offers a foundational understanding, preparing participants for advanced studies in this field.

A Brief Introduction of Micro – Sensors course by Swayam introduces learners to micro - and nano-sensors fabrications. This elective study is based on communications and electrical engineering. An e-certificate is available with the course. For the certificate, candidates must submit all assignments and write a final proctored examination.

Set at a postgraduate level of study, the Brief Introduction of Micro – Sensors certification syllabus integrates online learning through video lectures and practical application of concepts through assignments. Learners will understand the principles of strain-stress in energy dissipation used to design such sensors. Other topics include pressure sensors, lithography, MEM sensor applications, microfabrication, and accelerometers.

The Brief Introduction of Micro – Sensors training is curated by IISER Bhopal. Students will interact with the video lectures recorded by Professor Santanu Talukder from the institute. Any student interested in learning more about such sensors can apply for the course. Companies based around semiconductor and processing technology prefer students who have completed the study.

There is a substantial requirement for electrical energy around the world. Several countries, including India, are adopting UHV (ultra-high voltage) AC and DC transmission. The main objective of the Recent Advances in Transmission Insulators online course by Swayam is to understand the significance of basic principles of insulation design.

Recent Advances in Transmission Insulators programme will also discuss different kinds of insulators and recent developments in insulator technology up to UHV levels. During this course, you will also know about vital components in a transmission system such as conductors, earth wire, accessories, insulators, towers, foundations, and hardware fittings.

The Recent Advances in Transmission Insulators certification course will provide you with knowledge on major challenges faced by utilities in the design of overhead transmission insulators for UHV-DC/AC, especially in contaminated circumstances. You will learn through practical examples, 11 hours of video content, and assignment exercises. The course also provides an e-certificate on the fulfillment of some eligibility criteria.

Basics of software-defined Radios and Practical Applications is a 4 weeks programme that is a joint initiative of NPTEL and IIT Roorkee. This course offers an electronic copy of the certificate for its participants. The course teaches that SDR is a very important part of modern communication where processes used for hardware implementation are defined using the domain of software regarding flexibility.

Basics of software-defined Radios and Practical Applications training are used for providing the description of the several components of software-defined radios along with their significance, and relevance. The participants shall also understand the interrelationship between digital, and analog power processing and spectrum transmission of signals. At the final stage of this course, candidates will understand what kind of term solutions are used for industrial datasheets, and the motivation for appropriate transceiver design.